Просмотр кода страницы ZTE 320 Firmware Upgrade

Материал из noname.com.ua

← ZTE 320 Firmware Upgrade

У вас нет прав на выполнение действия «редактирование этой страницы» по следующей причине:

---

Вы можете просмотреть и скопировать исходный код этой страницы.

[[Категория:ZTE]] [[Категория:Networking]] [[Категория:PON]] [[Категория:C320]] =ZTE C320 Firmware Upgrade= Я не нашел внятной инструкции обновления, кроме https://telecomo.ru/company/news/31677.html которая не вполне соответствует действительности =О типах файлов= * <code>.BT</code> Загрузчик платы (Boot) Описывает алгоритм загрузки платы после подачи питания, версия загрузчика отличается от версии исполняемого кода, совместимости какой загрузчик и какой код он может загружать - не проверена. *<code>.FW</code> Прошивка платы Определяет функционал платы *<code>PM.FW</code> Прошивка чипа. Определяет функционал чипа (CPLD - Complex Programmable Logic Device), об обновлении его говорят много нехорошего. *<code>.MVR</code> Программное обеспечение исполгняемо на плате (судя по всему разновидность линукса) =Смотрим список установленных карт= <PRE> #show card </PRE> <PRE> Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status ------------------------------------------------------------------------------- 1 1 1 GTGH GTGHK 16 151202 V1.2.5P3 INSERVICE 1 1 2 GTGH GTGHK 16 151202 V1.2.5P3 INSERVICE 1 1 3 PRAM PRAM 3 V1.01 INSERVICE 1 1 4 SMXA SMXA 3 131201 V1.2.5P3 INSERVICE </PRE> Тут видно что линейная карта всего одного типа - <code>GTGHK</code>, другими словами это карта типа <code>GTGH</code> равизии <code>K</code> (которая кстати если верить интернетам наиболее проблемная) =Проверить версию кода который запущен= <PRE> show version-running </PRE> <PRE> PhyLoc FileType VerType VerTag BuildTime VerLength -------------------------------------------------------------------------------- 1/1/1 GTGHK MVR V1.2.5P3 2017-05-16 04:34:12 6010580 1/1/1 GTXK BT V4.0.14 2017-09-04 0:52:45 524288 1/1/4 SMXA MVR V1.2.5P3 2015-01-05 03:50:18 14818071 1/1/4 SMXA BT V4.0.5 2014-12-10 9:13:26 524288 1/1/2 GTGHK MVR V1.2.5P3 2017-05-16 04:34:12 6010580 1/1/2 GTXK BT V4.0.14 2017-09-04 0:52:45 524288 </PRE> <code>V1.2.5P3</code> =Проверить файлы которые уже залиты= <PRE> #dir img </PRE> <PRE> Directory of /flash/img/ attribute size date time name -rwx 524288 AUG-15-2012 17:08:54 smxa.bt -rwx 648494 AUG-15-2012 17:09:06 smxa.fw -rwx 524288 AUG-15-2012 17:09:16 etghg.bt -rwx 100675 AUG-15-2012 17:09:24 etghg.fw -rwx 10207084 AUG-15-2012 17:10:50 etghg.mvr -rwx 1527486 AUG-15-2012 17:11:10 etgo.fw -rwx 5083571 AUG-15-2012 17:11:50 etgo.mvr -rwx 253856 AUG-15-2012 17:11:58 etgod.bt -rwx 524288 AUG-15-2012 17:12:10 etto.bt -rwx 534532 AUG-15-2012 17:12:22 etto.fw -rwx 5510212 AUG-15-2012 17:13:12 etto.mvr -rwx 524288 AUG-15-2012 17:13:22 ftgkb.bt -rwx 85188 AUG-15-2012 17:13:30 ftgkb.fw -rwx 4803804 AUG-15-2012 17:14:18 ftgkb.mvr -rwx 524288 AUG-15-2012 17:14:28 gtghg.bt -rwx 100534 AUG-15-2012 17:14:38 gtghg.fw -rwx 5338780 AUG-15-2012 17:15:32 gtghg.mvr -rwx 524288 AUG-15-2012 17:15:44 gtgog.bt -rwx 139509 AUG-15-2012 17:15:52 gtgog.fw -rwx 5595416 AUG-15-2012 17:16:48 gtgog.mvr -rwx 524288 AUG-15-2012 17:17:00 gtxog.bt -rwx 8940762 AUG-15-2012 17:18:20 gtxog.fw -rwx 5329580 AUG-15-2012 17:19:20 gtxog.mvr -rwx 934 AUG-15-2012 17:19:30 pm.fw -rwx 14818071 AUG-15-2012 17:33:44 smxa1.mvr -rwx 14818071 AUG-15-2012 17:35:28 smxa0.mvr -rwx 461545 MAR-26-2017 12:18:50 gtxk.fw -rwx 524288 MAR-26-2017 12:20:32 gtxk.bt -rwx 6010580 MAR-26-2017 12:22:06 gtghk.mvr Current directory 29 files total </PRE> Тут видно что залито куча файлов, в том числе и те которые не особо нужны, так как они предназначены для карт которые отстутвуют =Проверить какие версии патчей исполняются= <PRE> show patch-running </PRE> <PRE> Loc FileName PatchTag OperateTime PatchState ------------------------------------------------------------------------------- 1/1/1 gtghkv125p3t29_r0.pat 2.0 2023-09-22 15:18:42 ACTIVE 1/1/2 gtghkv125p3t29_r0.pat 2.0 2023-09-22 15:18:49 ACTIVE 1/1/4 smxav125p3t13_r0.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r1.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r2.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r3.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r4.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r5.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r6.pat 2.0 2023-09-22 16:26:15 ACTIVE 1/1/4 smxav125p3t13_r7.pat 2.0 2023-09-22 16:26:16 ACTIVE 1/1/4 smxav125p3t13_r10.pat 2.0 2023-09-22 16:26:16 ACTIVE </PRE> =Деактивировать все патчи перед обновлением= <PRE> Deactive patch in shelf 1 slot 4 success Deactive patch finished </PRE> <PRE> #patch deactive smxav125p3t13_r1.pat Deactive patch in shelf 1 slot 4 success Deactive patch finished </PRE> <PRE> #patch deactive smxav125p3t13_r10.pat Deactive patch in shelf 1 slot 4 terminated for patch already deactive Deactive patch finished </PRE> ... и так далее для всех патчей =Проверить что все патчи деактивированы= <PRE> #show patch-running Loc FileName PatchTag OperateTime PatchState ------------------------------------------------------------------------------- </PRE> =Удалить все неиспользуемые файлы= <PRE> delete img gtgo* Confirm to delete?[yes/no]:yes Start deleting file deleting gtgog.bt.. [Successfully] deleting gtgog.fw.. [Successfully] deleting gtgog.mvr.. </PRE> и так для всех неиспользуемых файлов. =Загрузить новые файлы= В примере показан только часть. Порядок загрузки не имеет значения, более того если подготовить правильно директорию с файлами то можно загружать все сразу указав <code>*</code> как имя файла. <PRE> #download img smxa.bt Downloading from host(10.72.0.7) Transfering file smxa.bt ... ......................[Successfully] C320-Donec#download img gtxk.mvr Downloading from host(10.72.0.7) Transfering file gtxk.mvr ... .............................[Successfully] #download img smxa0.mvr Downloading from host(10.72.0.7) Transfering file smxa0.mvr ... ..............[Successfully] </PRE> ==<code>smxa1.mvr</code>/<code>smxa0.mvr</code>== Для того что бы обновить файл <code>smxa1.mvr</code> можно просто 2 раза скачать <code>smxa0.mvr</code>, первый раз он запишется в <code>smxa0.mvr</code>, второй раз в <code>smxa1.mvr</code> <P> Существует возможность переключаться между версиями, но учитывая что существует теоретическая возможность уложить платы в кирпич, я это никак не тестировал. =Проверить загруженные файлы= <PRE> #show version-saved master </PRE> <PRE> PhyLoc FileName VerType VerTag BuildTime Length Active -------------------------------------------------------------------------------- 1/1/4 gtghg.bt BT V4.0.7 2015-04-03 15:16:01 524288 1/1/4 gtghg.fw FW V2.1.0 2017-01-17 00:40:26 210990 1/1/4 gtghg.mvr MVR V2.1.0 2017-01-17 00:40:26 6933928 1/1/4 gtxk.bt BT V4.0.14 2017-09-04 0:52:45 524288 1/1/4 gtxk.fw FW V2.1.0 2017-07-03 00:28:55 462019 1/1/4 gtxk.mvr MVR V2.1.0 2017-07-03 00:28:55 7789380 1/1/4 pm.fw FW V2.1.0 2017-01-17 01:08:29 2135 1/1/4 smxa.bt BT V4.0.13 2017-04-26 9:53:13 524288 1/1/4 smxa.fw FW V2.1.0 2017-06-23 03:42:13 1720296 1/1/4 smxa0.mvr MVR V2.1.0 2017-01-17 01:04:45 24647784 1 1/1/4 smxa1.mvr MVR V2.1.0 2017-01-17 01:04:45 24647784 0 </PRE> Для моего набора плат я использовал следующий набор файлов: <PRE> #dir img </PRE> <PRE> Directory of /flash/img/ attribute size date time name -rwx 524288 SEP-27-2023 10:49:24 smxa.bt -rwx 1720296 SEP-27-2023 11:06:50 smxa.fw -rwx 524288 SEP-27-2023 10:48:22 gtxk.bt -rwx 7789380 SEP-27-2023 10:51:20 gtxk.mvr -rwx 24647784 SEP-27-2023 11:02:46 smxa1.mvr -rwx 462019 SEP-27-2023 11:04:36 gtxk.fw -rwx 24647784 SEP-27-2023 11:11:18 smxa0.mvr -rwx 524288 SEP-27-2023 11:35:54 gtghg.bt -rwx 210990 SEP-27-2023 11:36:00 gtghg.fw -rwx 6933928 SEP-27-2023 11:37:10 gtghg.mvr -rwx 934 AUG-15-2012 17:19:30 pm.fw </PRE> =Обновление bootloader= (https://telecomo.ru/company/news/31677.html) <P> Попытка обновить bootloader не увенчалась успехом. <PRE> #update-boot rackno 1 shelfno 1 slotno 1 .File not exist </PRE> Предположительная причина - то, что уже была установлена нужная версия, о чем я узнал позже. <BR> До обнавления загрузчик версии <code>4.0.14</code> и <code>4.0.5</code>, такой же как я пытался устновить. <PRE> #show version-running PhyLoc FileType VerType VerTag BuildTime VerLength -------------------------------------------------------------------------------- 1/1/1 GTGHK MVR V1.2.5P3 2017-05-16 04:34:12 6010580 1/1/1 GTXK BT V4.0.14 2017-09-04 0:52:45 524288 1/1/4 SMXA MVR V1.2.5P3 2015-01-05 03:50:18 14818071 1/1/4 SMXA BT V4.0.5 2014-12-10 9:13:26 524288 1/1/2 GTGHK MVR V1.2.5P3 2017-05-16 04:34:12 6010580 1/1/2 GTXK BT V4.0.14 2017-09-04 0:52:45 524288 </PRE> Проверить версию файла можно например так <PRE> strings gtxk.bt | grep ':V[0-9]' GTXK:V4.0.14 </PRE> Это вывод из файла, который я хотел установить, и он судя по всему, такой же как уже установлен. =Перезагрузить устройство после того как загружены все файлы= Перезагрузка занимает много времени (волноваться раньше чем через 20 минут не следует) <PRE> #reboot Confirm to reboot? [yes/no]:yes # </PRE> {{#spoiler:show=Полный лог перезагрузки| <PRE> start... KUBoot 2.02.10.P3-svn709 (Dec 10 2014 - 09:13:16) CPU: Unknown, Version: 2.1, (0x80ea0121) Core: E500, Version: 5.1, (0x80211051) Clock Configuration: CPU0:1188 MHz, CCB: 396 MHz, DDR: 396 MHz (792 MT/s data rate) (Asynchronous), LBC: 49 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: P2020SMXA DRAM: Initializing.... DDR3: 2048 MB Clear Mem OK! Decompress kuboot success! Now running in RAM - U-Boot at: 0db70000 FLASH: 128 MB L2 cache 512KB: enabled Nvram Init succeed! eTSEC2 is in sgmii mode. eTSEC3 is in sgmii mode. PCIE1: as Root Complex (base addr f400a000) Scanning PCI bus 01 01 00 14e4 b445 0200 00 PCIE1 on bus 00 - 01 PCIE2: as Root Complex (base addr f4009000) PCIE2 on bus 02 - 02 In: serial Out: serial Err: serial Net: eTSEC2, eTSEC1, eTSEC3 VFS init succeed! tffs fs detected dosfs_var_init finish! Un-Protect Flash Bank # 1 Start to initialize the DosFs... | verifyMap begin, needs about 1 minute!! verifyMap is done DiskOnChip Found objCoreInit-1, pObjCore:0xcb715a8, pObjClass:0xdcc188c objCoreInit-2 objCoreInit-1, pObjCore:0xcb715e0, pObjClass:0xcb715a8 objCoreInit-2 objCoreInit-1, pObjCore:0xcb71700, pObjClass:0xcb715a8 objCoreInit-2 Device / was created // - disk check in progress ... // - Volume is OK total # of clusters: 15,464 # of free clusters: 7,130 # of bad clusters: 0 total free space: 57,040Kb max contiguous free space: 31,031,296 bytes # of files: 27 # of folders: 8 total bytes in files: 66,475Kb # of lost chains: 0 total bytes in lost chains: 0 reservedSectors = (SectorNo) LE2(bpb->reservedSectors): 0x1 partEnableFF, reservedSectors:1 // - disk check in progress ... // - Volume is OK total # of clusters: 15,464 # of free clusters: 7,130 # of bad clusters: 0 total free space: 57,040Kb max contiguous free space: 31,031,296 bytes # of files: 27 # of folders: 8 total bytes in files: 66,475Kb # of lost chains: 0 total bytes in lost chains: 0 tffs init succeed <<<master>>> telnetdIint tcpip_thread TCP/IP initialized. Add netif ...... mac is ec:1d:7f:a:45:1e: Speed: 100, full duplex mac is 0:d0:d0:a1:aa:a0: Speed: 100, full duplex mac is 0:d0:d0:a2:aa:a0: force setting: speed 100, duplexity 1 Speed: 1000, full duplex Hit any key to stop autoboot: 0 This board not set cpld update! fsType is 4 Actived ver /img/smxa0.mvr ... FileRead size is 24647784 VerTag : V2.1.0T37 CreateTime : 2017-01-17 01:04:45 VerLen : 24647784 MVR is a Linux Version, but file system is tffs. tar and update start open_archive ...........................................................................................................................................................................................................................................t close_archive name_close tar over. Un-Protect Flash Bank # 1 ...........................................................................................................................................................................................................................................s /format jffs2 part success! jffs2 filesystem begin init! [linux2.4_jffs2/build.c--jffs2_build_filesystem:388] Pass 1 complete jffs2 filesystem init success!1-0:4009 \.. tar over. .Erased 1 sectors .Erased 1 sectors |entry is 3df00004 mvrType is linux version. ## Booting kernel from Legacy Image at 3df00134 ... Image Name: Linux-2.6.21.7-EMBSYS-SMXA-3.04. Created: 2017-01-16 17:04:45 UTC Image Type: PowerPC Linux Unknown Image (gzip compressed) Data Size: 23598840 Bytes = 22.5 MB Load Address: 00000000 Entry Point: 00000000 Contents: Image 0: 1724336 Bytes = 1.6 MB Image 1: 21854007 Bytes = 20.8 MB Image 2: 20480 Bytes = 20 kB Verifying Checksum ... OK Uncompressing Unknown Image ... OK ## Flattened Device Tree from multi component Image at 3DF00134 Booting using the fdt at 0x3f57c86c ## Loading init Ramdisk from multi component Legacy Image at 3df00134 ... ramdisk start = 0x3e0a5134, ramdisk end = 0x3f57c86b relocate: 1(bootmap_base:00000000) Loading Device Tree to 00ff8000, end 00ffffff ... OK Loading Ramdisk to 09696000, end 0ab6d737 ... OK U�ͥ�� P2020 DS machine description Memory CAM mapping: CAM0=256Mb, CAM1=16Mb, CAM2=16Mb residual: 16Mb Linux version 2.6.21.7-EMBSYS-CGEL-3.04.10.P5 (dailybuild@ ) (gcc version 4.1.2 2014-03-20 Embsys-TSP V3.03.20_P1) #1 PREEMPT Tue Dec 13 10:52:33 CST 2016 Found initrd at 0xc9696000:0xcab6d737 setup_arch: bootmem mpc85xx_ds_setup_arch() Found FSL PCI host bridge at 0x00000000f400a000.Firmware bus number: 0->255 ->Hose at 0xc03c0000, cfg_addr=0xfdffd000,cfg_data=0xfdffd004 Found FSL PCI host bridge at 0x00000000f4009000.Firmware bus number: 0->255 ->Hose at 0xc03c0100, cfg_addr=0xfdfeb000,cfg_data=0xfdfeb004 MPC85xx DS board from Freescale Semiconductor arch: exit Top of RAM: 0x13000000, Total RAM: 0x13000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 73728 Normal 73728 -> 73728 HighMem 73728 -> 77824 early_node_map[1] active PFN ranges 0: 0 -> 77824 calculate_node_totalpages:On node 0 totalpages: 77824 Built 1 zonelists. Total pages: 77216 Kernel command line: mottsec(1,0)host:vxWorks h=192.168.0.1 e=192.168.0.2:0xffffff00 u=lzq pw=lzq mem=304m mpic: Setting up MPIC " OpenPIC " version 1.2 at f4040000, max 2 CPUs mpic: ISU size: 256, shift: 8, mask: ff mpic: Initializing for 256 sources hwtimer: Added openpic_timer (PowerPC kernel OpenPIC timer) at index=0 PID hash table entries: 2048 (order: 11, 8192 bytes) Using P2020 DS machine description Memory CAM mapping: CAM0=256Mb, CAM1=16Mb, CAM2=16Mb residual: 16Mb Linux version 2.6.21.7-EMBSYS-CGEL-3.04.10.P5 (dailybuild@ ) (gcc version 4.1.2 2014-03-20 Embsys-TSP V3.03.20_P1) #1 PREEMPT Tue Dec 13 10:52:33 CST 2016 Found initrd at 0xc9696000:0xcab6d737 Found FSL PCI host bridge at 0x00000000f400a000.Firmware bus number: 0->255 ->Hose at 0xc03c0000, cfg_addr=0xfdffd000,cfg_data=0xfdffd004 Found FSL PCI host bridge at 0x00000000f4009000.Firmware bus number: 0->255 ->Hose at 0xc03c0100, cfg_addr=0xfdfeb000,cfg_data=0xfdfeb004 MPC85xx DS board from Freescale Semiconductor Top of RAM: 0x13000000, Total RAM: 0x13000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 73728 Normal 73728 -> 73728 HighMem 73728 -> 77824 early_node_map[1] active PFN ranges 0: 0 -> 77824 calculate_node_totalpages:On node 0 totalpages: 77824 Built 1 zonelists. Total pages: 77216 Kernel command line: mottsec(1,0)host:vxWorks h=192.168.0.1 e=192.168.0.2:0xffffff00 u=lzq pw=lzq mem=304m mpic: Setting up MPIC " OpenPIC " version 1.2 at f4040000, max 2 CPUs mpic: ISU size: 256, shift: 8, mask: ff mpic: Initializing for 256 sources hwtimer: Added openpic_timer (PowerPC kernel OpenPIC timer) at index=0 PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 282856k/311296k available (3472k kernel code, 44468k reserved, 108k data, 184k bss, 156k init) Mount-cache hash table entries: 512 --------V1.1 get u2k page base addr = 0xcfff3000 magic = 0x12345678 NET: Registered protocol family 16 Registering platform serial ports in file: /home/work/LINUX_trunk_new/kernel/linux/arch/powerpc/sysdev/fsl_soc.c begin register platform_device in file:/home/work/LINUX_trunk_new/kernel/linux/arch/powerpc/sysdev/fsl_soc.c i2c====> i2c_irq = 43 in file:/home/work/LINUX_trunk_new/kernel/linux/arch/powerpc/sysdev/fsl_soc.c i2c====> i2c_irq = 43 InitWatchDog Ok powerpc_sdhc_init ###fsl-nand fsl_elbc_of_init ###fsl-nand elbc irq_num = 19 ###fsl-nand: register fsl-elbc platform-device success ###fsl-nand fsl_elbc_of_init step2 ###fsl-nand r.start = 0xe8000000 r.end=0xe81fffff len=0x200000 ###fsl-nand: chip_data.name = nandflash ###fsl-nand: chip_data.partitions_str = ###fsl-nand platform device register success !! ###fsl-nand fsl_elbc_of_init step3 <6>PCI: Probing PCI hardware PCI: 0000:00:00.0: class b20 doesn't match header type 01. Ignoring class. PCI: 0001:02:00.0: class b20 doesn't match header type 01. Ignoring class. Generic PHY: Registered new driver NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 21341k freed sys_bbx_init [Kern_ExcInit]Prompt: Exception module initialize successfully! highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFFS2 version 2.2. (C) 2001-2006 Red Hat, Inc. YAFFS-WARNING CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED selected. io scheduler noop registered (default) Time: timebase clocksource has been installed. Generic RTC Driver v1.07 Macintosh non-volatile memory driver v1.1 RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize thread-exit capture initialized! i2c /dev entries driver f8000000.boot: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 f8000000.boot: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available physmap-flash f8000000.boot: Using OF partition information Creating 1 MTD partitions on "f8000000.boot": 0x00000000-0x00200000 : "boot" mtd: Giving out device 0 to boot e0000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 e0000000.flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available physmap-flash e0000000.flash: Using OF partition information Creating 3 MTD partitions on "e0000000.flash": 0x00000000-0x07e00000 : "jffs2" mtd: Giving out device 1 to jffs2 0x07e00000-0x07fc0000 : "rsv" mtd: Giving out device 2 to rsv 0x07fc0000-0x08000000 : "nvram" mtd: Giving out device 3 to nvram Broadcom BCM5411: Registered new driver Broadcom BCM5421: Registered new driver Broadcom BCM5461: Registered new driver Gianfar MII Bus: probed eth0: Gianfar Ethernet Controller Version 1.2, ec:1d:7f:0a:45:1e eth0: Running with NAPI enabled eth0: 256/256 RX/TX BD ring size eth1: Gianfar Ethernet Controller Version 1.2, 00:d0:d0:a1:aa:a0 eth1: Running with NAPI enabled eth1: 256/256 RX/TX BD ring size eth2: Gianfar Ethernet Controller Version 1.2, 00:d0:d0:a2:aa:a0 eth2: Running with NAPI enabled eth2: 256/256 RX/TX BD ring size Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO map 0xf4004500 mem 0xd3000500 (irq = 42) is a 16550A serial8250.0: ttyS1 at MMIO map 0xf4004600 mem 0xd3002600 (irq = 42) is a 16550A Virtual pic init... pro_limit init start... pro-limit init end... typeb netlink init... mmc0: SDHCI controller on f402e000.sdhci [f402e000.sdhci] using DMA hddled blink module init bsp_haddled_task running ..... OK ###fsl-nand: fsl_lbc_ctrl_dev->irq = 19 ###fsl-nand: fsl_lbc_ctrl_probe() .....ok ###fsl-nand fsl_elbc_nand_probe() fsl-elbc fsl-elbc.0: address did not match any chip selects TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 NET: Registered protocol family 17 Total 3 real net device found. set netlink_wq prio 96 Nld ready to receive ... Netlink Daemon start OK. Freeing unused kernel memory: 156k init init started: BusyBox V2.08.10_B1 (2016-12-13 11:00:51 CST starting pid 26, tty ' starting pid 30, tty ' ##########localaddr.sin_port is 11001 PHY: f4024520:05 - Link is Up - 100/Full create jffs2_gcd_mtd1 starting pid 35, tty ' BusyBox V2.08.10_B1 (2016-12-13 11:00:51 CST) built-in shell (ash) Enter 'helpp' for a list of built-in commands. -n Processing /etc/profile... Done value = 0 = 0xmap_mem:start:2810d000 ,pg=f4000 ,size=100000,prot= 297 0 exporting *:map_mem:start:2820d000 ,pg=20000 ,size=60000000,prot= 17 /flash/logalm map_mem:start:8820d000 ,pg=f8000 ,size=200000,prot= 297 exportfs: m map_mem:start:8840d000 ,pg=f0000 ,size=100000,prot= 297 exporting *:/fmap_mem:start:8850d000 ,pg=f1000 ,size=200000,prot= 297 lash/logdbg exportfs: m exporting *:/flash/logrun exportfs: m exporting *:/flash/perfmp exportfs: m exporting *:/flash/user exporting *:/flash/data exporting *:/flash/cfg exporting *:/flash/img # # DDR is 2GB IMMR base virtual addr 0x2810d000 RESV base virtual addr 0x2820d000 BOOT base virtual addr 0x8820d000 CPLD base virtual addr 0x8840d000 FPGA base virtual addr 0x8850d000 sysMemParaBase virtual addr 0x880fd000 Scanning function 0 of PCI busses 0-1, devices 0-0 bus dev fn venID devID class rev MBAR0 MBAR1 iPIN iLINE devCtrl 00 00 00 1957 0072 0b2000 21 00000000 00000000 00 00 0800 01 00 00 14e4 b445 020000 11 80000004 00000000 01 00 0000 nvram check ... done. bd check ... done. ifconfig eth1 down ifconfig eth1 hw ether ec:1d:7f:a:45:1e ifconfig eth1 136.1.1.100 ifconfig eth0 6.0.1.129 ifconfig eth0 down ifconfig eth0 hw ether 0:1:c:d:0:a6 ifconfig eth0 up Monitor Shell Started!! ##########localaddr.sin_port is 11002 virtual_pic_open, major = 254, minor = 0 pro_limit_open, major = 234, minor = 0 SMXA>eth0 Link encap:Ethernet HWaddr 00:01:0C:01:06:00 inet addr:6.0.1.129 Bcast:6.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::201:cff:fe01:600/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:82 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5576 (5.4 KiB) TX bytes:648 (648.0 B) Tyepb irq_recv_packet task Init succeed /dev/virtual-pic has open,ready. open sucess. /dev/pro_limit has open,ready. InitRtcTime version 2 OK SMXA>Get default FirmLogoInfo. PHY: f4024520:05 - Link is Up - 100/Full Assertion failed: file=/home/dailyman/work/C300V300/IAPV2.0_CODE_MAIN/src_ios/ros/source/rosrdreg.c, line=182, expression='pPRT->Used == 0x7F' PatchFileAdd: patchCfgForNpNext.txt patch check failed. PatchFileAdd: patchCfgForOam.txt patch check failed. PatchFileAdd: patchCfgForNpLast.txt patch check failed. PatchFileAdd: patchCfgNext.txt patch check failed. PatchFileAdd: patchCfgLast.txt patch check failed. PatchFileAdd: patchCfg.txt patch check failed. PatchFileAdd: patchCfgForNp.txt patch check failed. PatchNpBootSyncProc:sync finished. PatchModuleContinue. Cpld update start updateflag = 0x0 This board not set cpld update DRV: (0) ##########localaddr.sin_port is 11003 ##########localaddr.sin_port is 11004 bshell> SMXA>DRV: boardType=SMXA[unit=1] DRV: (1) linux_kernel_bdem: module license 'Proprietary' taints kernel. Broadcom Device Enumerator (linux-kernel-bde) DMA Memory (kernel): 8388608 bytes, 0 used, 8388608 free Devices: 0 (swi) : PCI device 0x14e4:0xb445:17:0x80000000:0x00000000:18 Broadcom Device Enumerator (linux-user-bmap_mem:start:91ac2000 ,pg=80000 ,size=40000,prot= 297 de) 0: Interrmap_mem:start:91b02000 ,pg=8c80 ,size=800000,prot= 17 upt mode CMICm LINUX MMAP: pbase = 0x80000000, vbase = 0x91ac2000, size = 262144 DMA pool size: 8388608 Attaching SOC unit 0... OK. slot 3 receive bootp request,GTGHK,gtxk.mvr DRV: (2) DRV: mmu init...DRV: (3) board mac msg register!!!! DRV: (4) BSP:[nvram_lib.c][334]:inband mac is 0xec1d7f0a,0x451d0000 value = 0 = 0x0 DRV: (5) DRV: (6) DRV: (7) slot 20 receive bootp request,GTGHK,gtxk.mvr slot 3 receive bootp request,GTGHK,gtxk.mvr slot 20 receive bootp request,GTGHK,gtxk.mvr Write file /flash/img/bcm56440_b0_0.srec ... ...Done soc uc start at 0x0 SSPDrvInit OK! DRV: (8) DRV: ends init[use=1065] Initialize License module... No license has been installed before. Initialize license status(0x1000401f) . Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. ZTE Corporation. YuHua District, Nanjing, China ZXR10 ROS Version V4.8.35(RELEASE SOFTWARE) Copyright (c) 2001-2017 by ZTE Corporation Compiled Jan 17 2017, 01:02:55 nl_socket init ok for eth1. bbx_viraddr_init[1283] ------version start----- hardName:SMXA hardVer:131201 MVerFuncVerName:SMXA MVerTag:V2.1.0T37 MVerCreateTime:2017-01-17 01:04:45 ------version end----- Switch Chip Temperature 36 ==\ Ros_MONSysExcInit Entry! /== Kernel Magic 0xffffffff! <--- buf:2146435072, len:11 <--- buf:16384, len:6 Initialize monitor process. Initialize monitor process timer.monInit: Out Synchronizing Synchronizing Rsl_PostLoConnected VirtualPic IRQ - 21 cal Ros_GetPno for CALLCTL error CpuNode mod 0 unit 1 Sysctrl notify msg 33046 to task CALLCTL failed for 1 times in SctlNotifyExec! Sctl update shelf phy info Get shelf mfgdata OK!!! Rsl_PostLocal Ros_GetPno for CALLCTL error CpuNode mod 0 unit 1 Sysctrl notify msg 33046 to task CALLCTL failed for 2 times in SctlNotifyExec! ##########localaddr.sin_port is 11004 ##########localaddr.sin_port is 11005 SysMonEntry get handle failed, curState:1, msgId:0x239! Master Database Power on!!!!!!!!!!!!! Database read Nvram data OK!!!!!!!!!!!!! >>MUX_INIT:muxLagInit,Init OK. Rsl_PostLocal Ros_GetPno for CALLCTL error CpuNode mod 0 unit 1 Sysctrl notify msg 33046 to task CALLCTL failed for 3 times in SctlNotifyExec! SetPRWGSTrapFlag SetPRWGSTrapFlag SetPRWGSTrapFlag protocol master goto WAIT_STATE Hello ...........................-OK! ************************************************ Welcome to ZXAN product C320 of ZTE Corporation ************************************************ </PRE> }} =После перезагрузки= Карты загружаются достаточно долго уже после того как основная система загруpзилась: <PRE> #show card Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status ------------------------------------------------------------------------------- 1 1 1 GTGH 16 HWONLINE 1 1 2 GTGH 16 HWONLINE 1 1 3 PRAM PRAM 3 V1.0.0 V1.01 INSERVICE 1 1 4 SMXA SMXA 3 V1.0.0 V2.1.0 INSERVICE </PRE> Через несколько минут, в течении которых я успел понервничать, (я бы сказал до 3-4), все приходит в норму. <PRE> #show card Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status ------------------------------------------------------------------------------- 1 1 1 GTGH GTGHK 16 V1.0.0 V2.1.0 INSERVICE 1 1 2 GTGH GTGHK 16 V1.0.0 V2.1.0 INSERVICE 1 1 3 PRAM PRAM 3 V1.0.0 V1.01 INSERVICE 1 1 4 SMXA SMXA 3 V1.0.0 V2.1.0 INSERVICE </PRE> =Patches= Далее заливать патчи, есть 2 типа патчей * <code>.spat</code> содержат в себе несколько патчей * <code>.pat</code> сождержат в себе отдельный патч Точной информации о том какие патчи нужны и что именно они делают, мне найти не удалось, по этой причине привожу команды по устновке патчей и список установленных патчей. <P> Активация некоторых патчей требует перезагрузки, о чем устройство сообщает. ==v210_p006.spat== <PRE> patch active package v210_p006.spat ... The card in slot 4 need to reset after patch is active! Set active flag of v210_p006.spat success! </PRE> <PRE> Position PatchFile VerTag ActiveTime Status ------------------------------------------------------------------------------- 1/1/4 smxav210t37_r0.pat V2.1.0 2023-09-27 12:55:38 Success 1/1/4 smxav210t37_r1.pat V2.1.0 2023-09-27 12:55:38 Reset 1/1/4 smxav210t37_r2.pat V2.1.0 2023-09-27 12:55:38 Reset 1/1/4 smxav210t37_r3.pat V2.1.0 2023-09-27 12:55:38 Reset </PRE> ==v210_p018.spat== <PRE> patch active package v210_p018.spat ...... The card in slot 1 need to reset after patch is active! The card in slot 2 need to reset after patch is active! The card in slot 4 need to reset after patch is active! Set active flag of v210_p018.spat success! </PRE> <PRE> #show patch-running Position PatchFile VerTag ActiveTime Status ------------------------------------------------------------------------------- 1/1/1 gtxkv210t45_r0.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/1 gtxkv210t45_r1.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/1 gtxkv210t45_r2.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/1 gtxkv210t45_r3.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/2 gtxkv210t45_r0.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/2 gtxkv210t45_r1.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/2 gtxkv210t45_r2.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/2 gtxkv210t45_r3.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/4 smxav210t37_r0.pat V2.1.0 2023-09-27 12:55:38 Success 1/1/4 smxav210t37_r1.pat V2.1.0 2023-09-27 12:55:38 Reset 1/1/4 smxav210t37_r2.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r3.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r4.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r5.pat V2.1.0 2023-09-27 12:58:47 Success 1/1/4 smxav210t37_r6.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r7.pat V2.1.0 2023-09-27 12:58:47 Success 1/1/4 smxav210t37_r8.pat V2.1.0 2023-09-27 12:58:47 Success 1/1/4 smxav210t37_r9.pat V2.1.0 2023-09-27 12:58:47 Success </PRE> ==v210_p030.spat== <PRE> patch active package v210_p030.spat ............... The card in slot 1 need to reset after patch is active! The card in slot 2 need to reset after patch is active! The card in slot 4 need to reset after patch is active! Set active flag of v210_p030.spat success! </PRE> <PRE> #show patch-running Position PatchFile VerTag ActiveTime Status ------------------------------------------------------------------------------- 1/1/1 gtxkv210t45_r0.pat V2.1.0 2023-09-27 12:58:49 Reset 1/1/1 gtxkv210t45_r1.pat V2.1.0 2023-09-27 13:01:02 Success 1/1/1 gtxkv210t45_r2.pat V2.1.0 2023-09-27 13:01:05 Reset 1/1/1 gtxkv210t45_r3.pat V2.1.0 2023-09-27 12:58:55 Reset 1/1/1 gtxkv210t45_r4.pat V2.1.0 2023-09-27 13:01:21 Success 1/1/1 gtxkv210t45_r5.pat V2.1.0 2023-09-27 13:01:07 Success 1/1/1 gtxkv210t45_r7.pat V2.1.0 2023-09-27 13:01:09 Success 1/1/1 gtxkv210t45_r8.pat V2.1.0 2023-09-27 13:01:11 Success 1/1/1 gtxkv210t45_r9.pat V2.1.0 2023-09-27 13:01:13 Success 1/1/1 gtxkv210t45_r10.pat V2.1.0 2023-09-27 13:01:15 Reset 1/1/1 gtxkv210t45_r11.pat V2.1.0 2023-09-27 13:01:17 Success 1/1/1 gtxkv210t45_r12.pat V2.1.0 2023-09-27 13:01:19 Success 1/1/1 gtxkv210t45_r13.pat V2.1.0 2023-09-27 13:01:23 Success 1/1/1 gtxkv210t45_r14.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/1 gtxkv210t45_r15.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/1 gtxkv210t45_r16.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/2 gtxkv210t45_r0.pat V2.1.0 2023-09-27 12:58:50 Reset 1/1/2 gtxkv210t45_r1.pat V2.1.0 2023-09-27 13:01:03 Success 1/1/2 gtxkv210t45_r2.pat V2.1.0 2023-09-27 13:01:05 Reset 1/1/2 gtxkv210t45_r3.pat V2.1.0 2023-09-27 12:58:56 Reset 1/1/2 gtxkv210t45_r4.pat V2.1.0 2023-09-27 13:01:21 Success 1/1/2 gtxkv210t45_r5.pat V2.1.0 2023-09-27 13:01:07 Success 1/1/2 gtxkv210t45_r7.pat V2.1.0 2023-09-27 13:01:09 Success 1/1/2 gtxkv210t45_r8.pat V2.1.0 2023-09-27 13:01:11 Success 1/1/2 gtxkv210t45_r9.pat V2.1.0 2023-09-27 13:01:13 Success 1/1/2 gtxkv210t45_r10.pat V2.1.0 2023-09-27 13:01:15 Reset 1/1/2 gtxkv210t45_r11.pat V2.1.0 2023-09-27 13:01:17 Success 1/1/2 gtxkv210t45_r12.pat V2.1.0 2023-09-27 13:01:19 Success 1/1/2 gtxkv210t45_r13.pat V2.1.0 2023-09-27 13:01:23 Success 1/1/2 gtxkv210t45_r14.pat V2.1.0 2023-09-27 13:01:25 Success 1/1/2 gtxkv210t45_r15.pat V2.1.0 2023-09-27 13:01:27 Success 1/1/2 gtxkv210t45_r16.pat V2.1.0 2000-01-01 03:00:00 Waiting 1/1/4 smxav210t37_r0.pat V2.1.0 2023-09-27 12:55:38 Success 1/1/4 smxav210t37_r1.pat V2.1.0 2023-09-27 12:55:38 Reset 1/1/4 smxav210t37_r2.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r3.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r4.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r5.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r6.pat V2.1.0 2023-09-27 12:58:47 Reset 1/1/4 smxav210t37_r7.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r8.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r9.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r10.pat V2.1.0 2023-09-27 13:01:02 Reset 1/1/4 smxav210t37_r11.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r12.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r13.pat V2.1.0 2023-09-27 13:01:01 Success 1/1/4 smxav210t37_r14.pat V2.1.0 2023-09-27 13:01:02 Success 1/1/4 smxav210t37_r15.pat V2.1.0 2023-09-27 13:01:02 Success 1/1/4 smxav210t37_r16.pat V2.1.0 2023-09-27 13:01:02 Success </PRE> =Финальный список патчей= ==<code>show patch-saved</code>== <PRE> #show patch-saved Position PatchFile VerTag BuildTime PatchLen Active ------------------------------------------------------------------------------- 1/1/4 v210_p006.spat V210 2017-06-14,16:27:16 386380 0 1/1/4 v210_p018.spat V210 2018-02-07,14:54:11 905280 0 1/1/4 v210_p030.spat V210 2019-03-06,22:25:21 2393212 1 1/1/4 cickv210t37_r7.pat V2.1.0 2017-10-26,17:47:38 4970 1 1/1/4 cickv210t37_r12.pat V2.1.0 2018-05-24,11:34:15 4418 1 1/1/4 ctlav210t37_r13.pat V2.1.0 2018-10-19,14:57:05 1369 1 1/1/4 ctubv210t37_r12.pat V2.1.0 2018-04-02,19:05:00 4071 1 1/1/4 etghgv210t37_r0.pat V2.1.0 2017-02-08,10:09:30 717 1 1/1/4 etghgv210t37_r2.pat V2.1.0 2017-04-21,00:54:00 3281 1 1/1/4 etghgv210t37_r3.pat V2.1.0 2017-05-19,08:37:23 5416 1 1/1/4 etghgv210t37_r7.pat V2.1.0 2017-12-11,17:35:44 11048 1 1/1/4 etghgv210t37_r8.pat V2.1.0 2018-06-30,13:09:00 28036 1 1/1/4 etghgv210t37_r10.pat V2.1.0 2018-02-11,13:52:11 749 1 1/1/4 etghgv210t37_r12.pat V2.1.0 2018-05-24,20:37:38 37647 1 1/1/4 etghgv210t37_r13.pat V2.1.0 2019-03-01,20:46:24 5084 1 1/1/4 etghgv210t37_r14.pat V2.1.0 2018-12-01,12:33:51 5505 1 1/1/4 etghgv210t37_r15.pat V2.1.0 2018-12-28,00:30:54 6812 1 1/1/4 etgov210t37_r0.pat V2.1.0 2017-02-08,10:09:43 717 1 1/1/4 etgov210t37_r2.pat V2.1.0 2017-05-20,16:29:44 23981 1 1/1/4 etgov210t37_r3.pat V2.1.0 2017-05-20,17:16:32 7048 1 1/1/4 etgov210t37_r5.pat V2.1.0 2017-09-25,11:22:20 5980 1 1/1/4 etgov210t37_r6.pat V2.1.0 2017-11-07,10:14:35 2651 1 1/1/4 etgov210t37_r7.pat V2.1.0 2018-01-02,13:53:11 24860 1 1/1/4 etgov210t37_r8.pat V2.1.0 2018-06-30,13:19:20 40038 1 1/1/4 etgov210t37_r10.pat V2.1.0 2018-02-11,13:52:01 749 1 1/1/4 etgov210t37_r11.pat V2.1.0 2018-07-12,10:25:46 5991 1 1/1/4 etgov210t37_r12.pat V2.1.0 2018-08-27,20:02:16 44876 1 1/1/4 etgov210t37_r13.pat V2.1.0 2019-03-01,20:57:37 13543 1 1/1/4 etgov210t37_r14.pat V2.1.0 2019-01-16,09:36:49 20244 1 1/1/4 etgov210t37_r15.pat V2.1.0 2019-02-28,12:24:09 12629 1 1/1/4 ettov210t37_r0.pat V2.1.0 2017-02-08,10:10:54 2797 1 1/1/4 ettov210t37_r2.pat V2.1.0 2017-05-04,20:03:38 12233 1 1/1/4 ettov210t37_r3.pat V2.1.0 2017-05-19,14:47:10 33930 1 1/1/4 ettov210t37_r6.pat V2.1.0 2017-11-07,10:15:47 18820 1 1/1/4 ettov210t37_r7.pat V2.1.0 2017-12-07,22:08:23 14141 1 1/1/4 ettov210t37_r8.pat V2.1.0 2018-06-30,13:13:26 37015 1 1/1/4 ettov210t37_r10.pat V2.1.0 2018-02-11,13:51:41 749 1 1/1/4 ettov210t37_r11.pat V2.1.0 2018-06-28,18:03:43 6106 1 1/1/4 ettov210t37_r12.pat V2.1.0 2018-05-24,20:45:10 44867 1 1/1/4 ettov210t37_r13.pat V2.1.0 2019-03-01,20:59:52 9834 1 1/1/4 ettov210t37_r14.pat V2.1.0 2018-12-01,12:09:55 7304 1 1/1/4 ettov210t37_r15.pat V2.1.0 2019-02-28,12:11:27 14417 1 1/1/4 etxdcv210t37_r12.pat V2.1.0 2018-05-24,20:45:34 37899 1 1/1/4 etxdcv210t37_r14.pat V2.1.0 2018-12-01,12:31:58 7415 1 1/1/4 etxdcv210t37_r15.pat V2.1.0 2018-12-28,11:48:01 5824 1 1/1/4 etxkv210t42_r0.pat V2.1.0 2017-10-24,08:48:30 29636 1 1/1/4 etxkv210t42_r2.pat V2.1.0 2017-08-01,16:40:45 10468 1 1/1/4 etxkv210t46_r0.pat V2.1.0 2018-02-13,15:50:21 14993 1 1/1/4 etxkv210t46_r1.pat V2.1.0 2018-04-25,15:38:24 9499 1 1/1/4 etxkv210t46_r7.pat V2.1.0 2018-08-07,19:09:03 12463 1 1/1/4 etxkv210t46_r8.pat V2.1.0 2018-07-10,11:29:05 74411 1 1/1/4 etxkv210t46_r10.pat V2.1.0 2018-04-12,10:06:38 2735 1 1/1/4 etxkv210t46_r11.pat V2.1.0 2018-07-16,10:06:38 9654 1 1/1/4 etxkv210t46_r12.pat V2.1.0 2018-12-12,13:56:18 97219 1 1/1/4 etxkv210t46_r13.pat V2.1.0 2018-12-03,19:56:53 8965 1 1/1/4 etxkv210t46_r14.pat V2.1.0 2018-12-01,16:51:41 10407 1 1/1/4 etxkv210t46_r15.pat V2.1.0 2019-01-04,10:31:12 7377 1 1/1/4 ftgkbv210t37_r0.pat V2.1.0 2017-02-08,10:11:01 1766 1 1/1/4 ftgkbv210t37_r2.pat V2.1.0 2017-04-21,00:53:48 3281 1 1/1/4 ftgkbv210t37_r3.pat V2.1.0 2017-05-09,11:10:34 2363 1 1/1/4 ftgkbv210t37_r7.pat V2.1.0 2017-10-26,17:48:07 5324 1 1/1/4 ftgkbv210t37_r8.pat V2.1.0 2018-01-09,09:52:21 6248 1 1/1/4 ftgkbv210t37_r12.pat V2.1.0 2018-05-24,11:34:47 4186 1 1/1/4 gtghgv210t37_r0.pat V2.1.0 2017-01-23,11:38:24 68993 1 1/1/4 gtghgv210t37_r1.pat V2.1.0 2017-03-20,18:14:04 17869 1 1/1/4 gtghgv210t37_r2.pat V2.1.0 2017-05-08,16:09:54 35754 1 1/1/4 gtghgv210t37_r3.pat V2.1.0 2017-05-19,13:49:19 7021 1 1/1/4 gtghgv210t37_r4.pat V2.1.0 2017-12-04,12:24:55 26879 1 1/1/4 gtghgv210t37_r5.pat V2.1.0 2017-09-23,21:22:03 6619 1 1/1/4 gtghgv210t37_r6.pat V2.1.0 2017-11-07,08:47:08 2167 1 1/1/4 gtghgv210t37_r7.pat V2.1.0 2018-02-08,10:28:31 23887 1 1/1/4 gtghgv210t37_r8.pat V2.1.0 2018-06-29,17:11:07 80386 1 1/1/4 gtghgv210t37_r9.pat V2.1.0 2018-08-23,09:08:39 19959 1 1/1/4 gtghgv210t37_r10.pat V2.1.0 2018-09-17,19:55:17 8900 1 1/1/4 gtghgv210t37_r11.pat V2.1.0 2018-07-13,20:30:26 34673 1 1/1/4 gtghgv210t37_r12.pat V2.1.0 2018-05-24,20:48:01 48164 1 1/1/4 gtghgv210t37_r13.pat V2.1.0 2019-03-01,20:26:20 19729 1 1/1/4 gtghgv210t37_r14.pat V2.1.0 2018-12-07,10:13:15 11515 1 1/1/4 gtghgv210t37_r15.pat V2.1.0 2019-01-03,11:20:18 18882 1 1/1/4 gtghgv210t37_r16.pat V2.1.0 2019-01-24,17:01:33 6975 1 1/1/4 gtghgv210t37_r23.pat V2.1.0 2018-08-15,10:14:42 750 1 1/1/4 gtgoav210t37_r1.pat V2.1.0 2017-03-20,17:59:18 8405 1 1/1/4 gtgoav210t37_r2.pat V2.1.0 2017-05-08,17:09:21 19144 1 1/1/4 gtgoav210t37_r3.pat V2.1.0 2017-05-19,13:44:47 5847 1 1/1/4 gtgoav210t37_r4.pat V2.1.0 2017-12-04,12:06:00 9688 1 1/1/4 gtgoav210t37_r5.pat V2.1.0 2017-09-23,20:52:20 5847 1 1/1/4 gtgoav210t37_r7.pat V2.1.0 2018-01-03,14:11:54 7109 1 1/1/4 gtgoav210t37_r8.pat V2.1.0 2018-06-29,16:54:49 51678 1 1/1/4 gtgoav210t37_r9.pat V2.1.0 2018-08-23,08:45:07 13986 1 1/1/4 gtgoav210t37_r10.pat V2.1.0 2018-09-17,19:52:22 1599 1 1/1/4 gtgoav210t37_r11.pat V2.1.0 2018-05-11,15:31:05 16574 1 1/1/4 gtgoav210t37_r12.pat V2.1.0 2018-05-24,20:51:19 40063 1 1/1/4 gtgoav210t37_r13.pat V2.1.0 2019-03-01,20:35:56 11444 1 1/1/4 gtgoav210t37_r14.pat V2.1.0 2018-12-07,10:36:33 12045 1 1/1/4 gtgoav210t37_r15.pat V2.1.0 2018-12-28,12:02:45 8241 1 1/1/4 gtgoav210t37_r16.pat V2.1.0 2019-01-24,17:03:22 6071 1 1/1/4 gtgocv210t37_r1.pat V2.1.0 2017-03-20,18:02:48 13041 1 1/1/4 gtgocv210t37_r2.pat V2.1.0 2017-05-08,16:17:12 25211 1 1/1/4 gtgocv210t37_r3.pat V2.1.0 2017-05-19,13:33:33 6262 1 1/1/4 gtgocv210t37_r4.pat V2.1.0 2017-12-04,12:09:19 9688 1 1/1/4 gtgocv210t37_r5.pat V2.1.0 2017-09-23,20:55:44 5847 1 1/1/4 gtgocv210t37_r7.pat V2.1.0 2018-02-11,17:58:54 14027 1 1/1/4 gtgocv210t37_r8.pat V2.1.0 2018-06-29,16:58:51 60102 1 1/1/4 gtgocv210t37_r9.pat V2.1.0 2018-08-23,08:56:55 15566 1 1/1/4 gtgocv210t37_r10.pat V2.1.0 2018-09-17,19:50:25 1599 1 1/1/4 gtgocv210t37_r11.pat V2.1.0 2018-07-03,17:10:46 17267 1 1/1/4 gtgocv210t37_r12.pat V2.1.0 2018-05-24,20:54:58 38936 1 1/1/4 gtgocv210t37_r13.pat V2.1.0 2019-03-01,20:38:09 11444 1 1/1/4 gtgocv210t37_r14.pat V2.1.0 2018-12-07,10:31:21 12385 1 1/1/4 gtgocv210t37_r15.pat V2.1.0 2018-12-28,12:06:19 8953 1 1/1/4 gtgocv210t37_r16.pat V2.1.0 2019-01-24,17:05:32 6071 1 1/1/4 gtgodv210t37_r1.pat V2.1.0 2017-03-20,18:05:46 8016 1 1/1/4 gtgodv210t37_r2.pat V2.1.0 2017-05-08,17:12:30 19786 1 1/1/4 gtgodv210t37_r3.pat V2.1.0 2017-05-19,13:36:38 5847 1 1/1/4 gtgodv210t37_r4.pat V2.1.0 2017-12-04,12:12:12 9688 1 1/1/4 gtgodv210t37_r5.pat V2.1.0 2017-09-23,20:58:36 5847 1 1/1/4 gtgodv210t37_r7.pat V2.1.0 2018-01-03,14:15:00 7109 1 1/1/4 gtgodv210t37_r8.pat V2.1.0 2018-06-29,17:02:07 41784 1 1/1/4 gtgodv210t37_r9.pat V2.1.0 2018-03-01,12:24:01 877 1 1/1/4 gtgodv210t37_r11.pat V2.1.0 2018-05-11,15:38:17 16574 1 1/1/4 gtgodv210t37_r12.pat V2.1.0 2018-05-24,20:55:24 37899 1 1/1/4 gtgoev210t37_r1.pat V2.1.0 2017-03-20,18:09:30 13579 1 1/1/4 gtgoev210t37_r2.pat V2.1.0 2017-05-08,16:24:12 32353 1 1/1/4 gtgoev210t37_r3.pat V2.1.0 2017-05-19,13:30:01 7461 1 1/1/4 gtgoev210t37_r4.pat V2.1.0 2018-11-07,11:50:08 12309 1 1/1/4 gtgoev210t37_r5.pat V2.1.0 2017-09-23,21:00:49 5811 1 1/1/4 gtgoev210t37_r7.pat V2.1.0 2018-02-11,18:12:05 13911 1 1/1/4 gtgoev210t37_r8.pat V2.1.0 2018-06-29,17:06:01 60929 1 1/1/4 gtgoev210t37_r9.pat V2.1.0 2018-08-23,08:53:20 13554 1 1/1/4 gtgoev210t37_r10.pat V2.1.0 2018-09-17,19:38:57 1599 1 1/1/4 gtgoev210t37_r11.pat V2.1.0 2018-07-03,17:14:41 17207 1 1/1/4 gtgoev210t37_r12.pat V2.1.0 2018-05-24,20:57:25 48241 1 1/1/4 gtgoev210t37_r13.pat V2.1.0 2019-03-01,20:43:14 18284 1 1/1/4 gtgoev210t37_r14.pat V2.1.0 2018-12-07,10:34:28 10279 1 1/1/4 gtgoev210t37_r15.pat V2.1.0 2018-12-28,12:13:11 8837 1 1/1/4 gtgoev210t37_r16.pat V2.1.0 2019-01-24,17:08:45 6055 1 1/1/4 gtgogv210t37_r0.pat V2.1.0 2017-02-08,08:43:19 3247 1 1/1/4 gtgogv210t37_r1.pat V2.1.0 2017-03-20,18:18:27 17869 1 1/1/4 gtgogv210t37_r2.pat V2.1.0 2017-05-08,16:28:38 35754 1 1/1/4 gtgogv210t37_r3.pat V2.1.0 2017-05-19,13:54:09 7021 1 1/1/4 gtgogv210t37_r4.pat V2.1.0 2017-12-04,12:20:27 26887 1 1/1/4 gtgogv210t37_r5.pat V2.1.0 2017-09-23,21:03:07 6619 1 1/1/4 gtgogv210t37_r7.pat V2.1.0 2018-02-11,18:03:50 23847 1 1/1/4 gtgogv210t37_r8.pat V2.1.0 2018-06-29,17:15:37 80390 1 1/1/4 gtgogv210t37_r9.pat V2.1.0 2018-08-23,08:49:37 19959 1 1/1/4 gtgogv210t37_r10.pat V2.1.0 2018-09-17,19:35:58 3303 1 1/1/4 gtgogv210t37_r11.pat V2.1.0 2018-07-13,20:34:44 34318 1 1/1/4 gtgogv210t37_r12.pat V2.1.0 2018-05-24,20:59:41 48132 1 1/1/4 gtgogv210t37_r13.pat V2.1.0 2019-03-01,20:24:51 19729 1 1/1/4 gtgogv210t37_r14.pat V2.1.0 2018-12-07,10:16:50 11515 1 1/1/4 gtgogv210t37_r15.pat V2.1.0 2018-12-28,12:17:48 18783 1 1/1/4 gtgogv210t37_r16.pat V2.1.0 2019-01-24,17:10:12 6975 1 1/1/4 gtgogv210t37_r23.pat V2.1.0 2018-08-15,10:11:57 750 1 1/1/4 gtxkv210t45_r0.pat V2.1.0 2017-08-08,11:52:20 9685 1 1/1/4 gtxkv210t45_r1.pat V2.1.0 2018-04-25,15:35:46 11739 1 1/1/4 gtxkv210t45_r2.pat V2.1.0 2018-02-26,10:06:51 19220 1 1/1/4 gtxkv210t45_r3.pat V2.1.0 2017-11-22,19:26:37 12105 1 1/1/4 gtxkv210t45_r4.pat V2.1.0 2018-10-23,11:52:03 39822 1 1/1/4 gtxkv210t45_r5.pat V2.1.0 2018-04-24,20:16:16 29494 1 1/1/4 gtxkv210t45_r7.pat V2.1.0 2018-02-24,14:53:57 8094 1 1/1/4 gtxkv210t45_r8.pat V2.1.0 2018-07-11,10:17:35 77066 1 1/1/4 gtxkv210t45_r9.pat V2.1.0 2018-08-28,09:44:50 24895 1 1/1/4 gtxkv210t45_r10.pat V2.1.0 2018-09-17,19:25:05 5289 1 1/1/4 gtxkv210t45_r11.pat V2.1.0 2018-07-19,09:18:42 32081 1 1/1/4 gtxkv210t45_r12.pat V2.1.0 2018-05-25,17:26:11 94030 1 1/1/4 gtxkv210t45_r13.pat V2.1.0 2019-03-06,14:44:10 21874 1 1/1/4 gtxkv210t45_r14.pat V2.1.0 2018-12-07,10:06:39 19110 1 1/1/4 gtxkv210t45_r15.pat V2.1.0 2019-01-14,15:49:56 31786 1 1/1/4 gtxkv210t45_r16.pat V2.1.0 2019-01-25,08:59:32 6975 1 1/1/4 gtxkv210t45_r17.pat V2.1.0 2019-06-10,13:37:00 1880 1 1/1/4 gtxkv210t45_r18.pat V2.1.0 2019-04-17,14:21:07 8308 1 1/1/4 gtxkv210t45_r21.pat V2.1.0 2019-07-15,15:25:11 13297 1 1/1/4 gtxogv210t37_r1.pat V2.1.0 2017-03-20,18:28:14 18784 1 1/1/4 gtxogv210t37_r2.pat V2.1.0 2017-05-08,16:33:02 35754 1 1/1/4 gtxogv210t37_r3.pat V2.1.0 2017-05-19,13:41:22 7021 1 1/1/4 gtxogv210t37_r4.pat V2.1.0 2017-12-04,12:29:25 26895 1 1/1/4 gtxogv210t37_r5.pat V2.1.0 2017-09-23,21:05:26 6403 1 1/1/4 gtxogv210t37_r7.pat V2.1.0 2018-02-11,18:08:09 23591 1 1/1/4 gtxogv210t37_r8.pat V2.1.0 2018-06-29,17:20:05 75508 1 1/1/4 gtxogv210t37_r9.pat V2.1.0 2018-08-23,09:04:10 17555 1 1/1/4 gtxogv210t37_r10.pat V2.1.0 2018-09-17,19:56:43 3303 1 1/1/4 gtxogv210t37_r11.pat V2.1.0 2018-07-13,20:39:01 33562 1 1/1/4 gtxogv210t37_r12.pat V2.1.0 2018-05-24,21:02:13 48280 1 1/1/4 gtxogv210t37_r13.pat V2.1.0 2019-03-01,20:44:45 17695 1 1/1/4 gtxogv210t37_r14.pat V2.1.0 2018-12-07,10:19:50 10687 1 1/1/4 gtxogv210t37_r15.pat V2.1.0 2018-12-28,12:22:26 19091 1 1/1/4 gtxogv210t37_r16.pat V2.1.0 2019-01-24,17:11:38 6975 1 1/1/4 gucdv210t37_r0.pat V2.1.0 2018-03-22,14:46:27 2590 1 1/1/4 gucdv210t37_r1.pat V2.1.0 2017-10-25,16:59:08 4234 1 1/1/4 gucdv210t37_r4.pat V2.1.0 2018-07-19,18:20:51 2101 1 1/1/4 hutqv210t37_r0.pat V2.1.0 2018-02-07,13:03:38 946 1 1/1/4 hutqv210t37_r1.pat V2.1.0 2017-10-25,16:58:49 4234 1 1/1/4 hutqv210t37_r2.pat V2.1.0 2018-05-11,11:34:25 7340 1 1/1/4 hutqv210t37_r4.pat V2.1.0 2018-07-19,18:20:43 2101 1 1/1/4 hutqbv210t37_r0.pat V2.1.0 2018-03-22,14:46:58 2590 1 1/1/4 hutqbv210t37_r1.pat V2.1.0 2017-10-25,16:58:27 4234 1 1/1/4 hutqbv210t37_r2.pat V2.1.0 2018-05-11,11:34:54 6060 1 1/1/4 hutqbv210t37_r3.pat V2.1.0 2017-05-19,13:54:26 4533 1 1/1/4 hutqbv210t37_r4.pat V2.1.0 2018-07-19,18:20:59 2101 1 1/1/4 hutqbv210t37_r15.pat V2.1.0 2018-11-29,11:26:16 1879 1 1/1/4 smxav210t37_r0.pat V2.1.0 2017-02-23,18:00:02 27278 1 1/1/4 smxav210t37_r1.pat V2.1.0 2017-03-20,17:00:49 48138 1 1/1/4 smxav210t37_r2.pat V2.1.0 2017-09-01,18:34:38 64587 1 1/1/4 smxav210t37_r3.pat V2.1.0 2017-07-20,20:28:10 71304 1 1/1/4 smxav210t37_r4.pat V2.1.0 2017-09-06,18:34:28 76059 1 1/1/4 smxav210t37_r5.pat V2.1.0 2018-11-09,23:09:52 36850 1 1/1/4 smxav210t37_r6.pat V2.1.0 2017-11-07,10:09:10 14655 1 1/1/4 smxav210t37_r7.pat V2.1.0 2018-09-29,12:38:51 115348 1 1/1/4 smxav210t37_r8.pat V2.1.0 2018-04-12,11:14:07 51320 1 1/1/4 smxav210t37_r9.pat V2.1.0 2019-02-01,16:12:42 224372 1 1/1/4 smxav210t37_r10.pat V2.1.0 2018-11-16,14:26:56 35642 1 1/1/4 smxav210t37_r11.pat V2.1.0 2018-07-13,20:25:03 63461 1 1/1/4 smxav210t37_r12.pat V2.1.0 2018-06-04,18:30:17 38275 1 1/1/4 smxav210t37_r13.pat V2.1.0 2018-10-25,17:37:42 22799 1 1/1/4 smxav210t37_r14.pat V2.1.0 2019-01-11,11:20:05 49065 1 1/1/4 smxav210t37_r15.pat V2.1.0 2019-01-25,10:30:57 64473 1 1/1/4 smxav210t37_r16.pat V2.1.0 2019-01-26,15:24:56 87948 1 1/1/4 smxav210t37_r18.pat V2.1.0 2019-04-19,15:07:22 3315 1 1/1/4 smxav210t37_r19.pat V2.1.0 2019-07-01,15:55:07 35900 1 1/1/4 smxav210t37_r20.pat V2.1.0 2019-07-23,01:19:22 110758 1 1/1/4 smxav210t37_r21.pat V2.1.0 2019-07-15,12:10:57 2337 1 1/1/4 smxav210t37_r28.pat V2.1.0 2018-11-13,15:42:11 596667 1 1/1/4 xutqv210t37_r1.pat V2.1.0 2017-10-30,14:49:36 4234 1 1/1/4 xuvqv210t37_r0.pat V2.1.0 2017-07-05,14:08:14 1766 1 1/1/4 xuvqv210t37_r1.pat V2.1.0 2017-10-25,16:58:56 4234 1 </PRE> ==<code>show patch-running</code>== <PRE> #show patch-running Position PatchFile VerTag ActiveTime Status ------------------------------------------------------------------------------- 1/1/1 gtxkv210t45_r0.pat V2.1.0 2023-09-27 16:24:38 Success 1/1/1 gtxkv210t45_r1.pat V2.1.0 2023-09-27 16:24:42 Success 1/1/1 gtxkv210t45_r2.pat V2.1.0 2023-09-27 16:24:46 Success 1/1/1 gtxkv210t45_r3.pat V2.1.0 2023-09-27 16:24:50 Success 1/1/1 gtxkv210t45_r4.pat V2.1.0 2023-09-27 16:24:54 Success 1/1/1 gtxkv210t45_r5.pat V2.1.0 2023-09-27 16:24:58 Success 1/1/1 gtxkv210t45_r7.pat V2.1.0 2023-09-27 16:25:02 Success 1/1/1 gtxkv210t45_r8.pat V2.1.0 2023-09-27 16:25:08 Success 1/1/1 gtxkv210t45_r9.pat V2.1.0 2023-09-27 16:25:12 Success 1/1/1 gtxkv210t45_r10.pat V2.1.0 2023-09-27 16:25:16 Success 1/1/1 gtxkv210t45_r11.pat V2.1.0 2023-09-27 16:25:20 Success 1/1/1 gtxkv210t45_r12.pat V2.1.0 2023-09-27 16:25:24 Success 1/1/1 gtxkv210t45_r13.pat V2.1.0 2023-09-27 16:25:28 Success 1/1/1 gtxkv210t45_r14.pat V2.1.0 2023-09-27 16:25:32 Success 1/1/1 gtxkv210t45_r15.pat V2.1.0 2023-09-27 16:25:36 Success 1/1/1 gtxkv210t45_r16.pat V2.1.0 2023-09-27 16:25:40 Success 1/1/1 gtxkv210t45_r17.pat V2.1.0 2023-09-27 16:25:44 Success 1/1/1 gtxkv210t45_r18.pat V2.1.0 2023-09-27 16:25:48 Success 1/1/1 gtxkv210t45_r21.pat V2.1.0 2023-09-27 16:25:52 Success 1/1/2 gtxkv210t45_r0.pat V2.1.0 2023-09-27 16:24:35 Success 1/1/2 gtxkv210t45_r1.pat V2.1.0 2023-09-27 16:24:39 Success 1/1/2 gtxkv210t45_r2.pat V2.1.0 2023-09-27 16:24:43 Success 1/1/2 gtxkv210t45_r3.pat V2.1.0 2023-09-27 16:24:47 Success 1/1/2 gtxkv210t45_r4.pat V2.1.0 2023-09-27 16:24:51 Success 1/1/2 gtxkv210t45_r5.pat V2.1.0 2023-09-27 16:24:55 Success 1/1/2 gtxkv210t45_r7.pat V2.1.0 2023-09-27 16:24:59 Success 1/1/2 gtxkv210t45_r8.pat V2.1.0 2023-09-27 16:25:05 Success 1/1/2 gtxkv210t45_r9.pat V2.1.0 2023-09-27 16:25:09 Success 1/1/2 gtxkv210t45_r10.pat V2.1.0 2023-09-27 16:25:13 Success 1/1/2 gtxkv210t45_r11.pat V2.1.0 2023-09-27 16:25:17 Success 1/1/2 gtxkv210t45_r12.pat V2.1.0 2023-09-27 16:25:21 Success 1/1/2 gtxkv210t45_r13.pat V2.1.0 2023-09-27 16:25:25 Success 1/1/2 gtxkv210t45_r14.pat V2.1.0 2023-09-27 16:25:29 Success 1/1/2 gtxkv210t45_r15.pat V2.1.0 2023-09-27 16:25:33 Success 1/1/2 gtxkv210t45_r16.pat V2.1.0 2023-09-27 16:25:37 Success 1/1/2 gtxkv210t45_r17.pat V2.1.0 2023-09-27 16:25:41 Success 1/1/2 gtxkv210t45_r18.pat V2.1.0 2023-09-27 16:25:45 Success 1/1/2 gtxkv210t45_r21.pat V2.1.0 2023-09-27 16:25:49 Success 1/1/4 smxav210t37_r0.pat V2.1.0 2023-09-27 16:50:03 Success 1/1/4 smxav210t37_r1.pat V2.1.0 2023-09-27 16:50:05 Success 1/1/4 smxav210t37_r2.pat V2.1.0 2023-09-27 16:50:07 Success 1/1/4 smxav210t37_r3.pat V2.1.0 2023-09-27 16:50:09 Success 1/1/4 smxav210t37_r4.pat V2.1.0 2023-09-27 16:50:11 Success 1/1/4 smxav210t37_r5.pat V2.1.0 2023-09-27 16:50:13 Success 1/1/4 smxav210t37_r6.pat V2.1.0 2023-09-27 16:50:15 Success 1/1/4 smxav210t37_r7.pat V2.1.0 2023-09-27 16:50:17 Success 1/1/4 smxav210t37_r8.pat V2.1.0 2023-09-27 16:50:19 Success 1/1/4 smxav210t37_r9.pat V2.1.0 2023-09-27 16:50:21 Success 1/1/4 smxav210t37_r10.pat V2.1.0 2023-09-27 16:50:23 Success 1/1/4 smxav210t37_r11.pat V2.1.0 2023-09-27 16:50:25 Success 1/1/4 smxav210t37_r12.pat V2.1.0 2023-09-27 16:50:27 Success 1/1/4 smxav210t37_r13.pat V2.1.0 2023-09-27 16:50:29 Success 1/1/4 smxav210t37_r14.pat V2.1.0 2023-09-27 16:50:31 Success 1/1/4 smxav210t37_r15.pat V2.1.0 2023-09-27 16:50:33 Success 1/1/4 smxav210t37_r16.pat V2.1.0 2023-09-27 16:50:36 Success 1/1/4 smxav210t37_r18.pat V2.1.0 2023-09-27 16:50:38 Success 1/1/4 smxav210t37_r19.pat V2.1.0 2023-09-27 16:50:42 Success 1/1/4 smxav210t37_r20.pat V2.1.0 2023-09-27 16:50:44 Success 1/1/4 smxav210t37_r21.pat V2.1.0 2023-09-27 16:50:46 Success 1/1/4 smxav210t37_r28.pat V2.1.0 2023-09-27 16:50:49 Success </PRE>

Возврат к странице ZTE 320 Firmware Upgrade.