Cisco-COPP-ASR1001: различия между версиями

Материал из noname.com.ua
Перейти к навигацииПерейти к поиску
Строка 205: Строка 205:
 
permit ip any any
  
permit ip any any
 
exit
  
exit
  +
</PRE>
   
  +
<PRE>
−  
 
event manager environment KNOCK_ACL_SSH ACCESS_LIST_COPP_SSH
  
event manager environment KNOCK_ACL_SSH ACCESS_LIST_COPP_SSH
 
event manager environment KNOCK_ACL_TELNET ACCESS_LIST_COPP_TELNET
  
event manager environment KNOCK_ACL_TELNET ACCESS_LIST_COPP_TELNET

Версия 11:11, 2 июля 2024


Control Plane Policing (CoPP) (на примере ASR1001)

Общая идея работы:

  • ACL описывают разрешенные сети/порты
  • Class-map просто обертка над ACL никакой дополнительной логики они не вносят
  • Policy-map объединяет правило в список, сначала запрещяющие правила потом разрешить все что не запрещено

Если запретить "все что не разрешено", то прийдется повозиться с разрешениями - например сходу отломался LACP когда я попробовал такую схему.

Очистка

Перед настройкой удалить существующие настройки 

control-plane
 no service-policy input POLICY_MAP_COPP_INPUT_POLICY
exit
no policy-map POLICY_MAP_COPP_INPUT_POLICY

ACL

Особенность ACL:
так как все что попадет под permit, после попадет в соответствующий class-map то
ACL вывернут на изнанку - deny означает "разрешить" (исключить из class-map и направить в разрешающее правило)

ip access-list extended ACCESS_LIST_COPP_TELNET

  • deny tcp any any established разрешить уже установленные соединения
no ip access-list extended ACCESS_LIST_COPP_TELNET
ip access-list extended ACCESS_LIST_COPP_TELNET
 deny   tcp any any established
 permit tcp any any eq telnet
exit

ip access-list extended ACCESS_LIST_COPP_SSH

no ip access-list extended ACCESS_LIST_COPP_SSH
ip access-list extended ACCESS_LIST_COPP_SSH
 deny   tcp any any established
 permit tcp any any eq 22
exit

ip access-list extended ACCESS_LIST_COPP_SNMP

no ip access-list extended ACCESS_LIST_COPP_SNMP
ip access-list extended ACCESS_LIST_COPP_SNMP
 deny   udp 172.31.100.0  0.0.0.255 any eq snmp
 deny   udp 10.72.0.0     0.0.0.255 any eq 161
 permit udp any any eq 161
exit

ip access-list extended ACCESS_LIST_COPP_BGP

no ip access-list extended ACCESS_LIST_COPP_BGP
ip access-list extended ACCESS_LIST_COPP_BGP
 deny   tcp any any established
 deny   tcp 172.31.0.0 0.0.0.255 any eq 179
 permit tcp any any eq 179
exit

ip access-list extended ACCESS_LIST_COPP_RADIUS

no ip access-list extended ACCESS_LIST_COPP_RADIUS
ip access-list extended ACCESS_LIST_COPP_RADIUS
 deny   udp 172.31.0.0    0.0.0.255 any eq 1812
 deny   udp 172.31.0.0    0.0.0.255 any eq 1813
 deny   udp 100.100.100.0 0.0.0.255 any eq 1812
 deny   udp 100.100.100.0 0.0.0.255 any eq 1813
 permit tcp any any eq 1812
 permit tcp any any eq 1813
exit

class-map

class-map CLASS_MAP_COPP_TELNET

no class-map CLASS_MAP_COPP_TELNET
class-map CLASS_MAP_COPP_TELNET
  match access-group name ACCESS_LIST_COPP_TELNET
exit

class-map CLASS_MAP_COPP_SSH

no class-map CLASS_MAP_COPP_SSH
class-map CLASS_MAP_COPP_SSH
  match access-group name ACCESS_LIST_COPP_SSH
exit

class-map CLASS_MAP_COPP_SNMP

no class-map CLASS_MAP_COPP_SNMP
class-map CLASS_MAP_COPP_SNMP
  match access-group name ACCESS_LIST_COPP_SNMP
exit

class-map CLASS_MAP_COPP_BGP

no class-map CLASS_MAP_COPP_BGP
class-map CLASS_MAP_COPP_BGP
  match access-group name ACCESS_LIST_COPP_BGP
exit

class-map CLASS_MAP_COPP_RADIUS

no class-map CLASS_MAP_COPP_RADIUS
class-map CLASS_MAP_COPP_RADIUS
  match access-group name ACCESS_LIST_COPP_RADIUS
exit

policy-map POLICY_MAP_COPP_INPUT_POLICY

policy-map разбита на части для удобства восприятия

  • Строчка police cir 32000 bc 1500 be 1500 conform-action drop exceed-action drop violate-action drop эквивалентно действию drop так как на некоторых платформах это действие недоступно
  • Удалить и заново добавить policy-map
no policy-map POLICY_MAP_COPP_INPUT_POLICY
policy-map POLICY_MAP_COPP_INPUT_POLICY

telnet

! Deny telnet
 class CLASS_MAP_COPP_TELNET
  police cir 32000 bc 1500 be 1500 conform-action drop exceed-action drop violate-action drop
  exit
 exit

ssh

! Deny ssh
 class CLASS_MAP_COPP_SSH
  police cir 32000 bc 1500 be 1500 conform-action drop exceed-action drop violate-action drop
  exit
 exit

snmp

! Deny SNMP
 class CLASS_MAP_COPP_SNMP
  police cir 32000 bc 1500 be 1500 conform-action drop exceed-action drop violate-action drop
  exit
 exit
!

BGP

! Deny BGP
 class CLASS_MAP_COPP_BGP
  police cir 32000 bc 1500 be 1500 conform-action drop exceed-action drop violate-action drop
  exit
 exit
!

Radius

! Deny RADIUS
 class CLASS_MAP_COPP_RADIUS
  police cir 32000 bc 1500 be 1500 conform-action drop exceed-action drop violate-action drop
  exit
 exit
!

Остальной траффик

! Permit other (include LACP)
 class class-default
  police cir 32000 bc 1500 be 1500 conform-action transmit exceed-action transmit violate-action transmit
  exit
 exit
exit

control-plane

control-plane
 no service-policy input POLICY_MAP_COPP_INPUT_POLICY
 service-policy input POLICY_MAP_COPP_INPUT_POLICY
exit

Port Knock

ip access-list extended KNOCK_TCP_32022
 remark *** KNOCK ***
 permit tcp any host 172.31.100.194 eq 32022 log
 remark *** PERMITED ***
 permit ip any any
exit

event manager environment KNOCK_ACL_SSH    ACCESS_LIST_COPP_SSH
event manager environment KNOCK_ACL_TELNET ACCESS_LIST_COPP_TELNET
    no event manager applet KNOCK_TELNET_SSH
    event manager applet KNOCK_TELNET_SSH
     event syslog pattern "%FMANFP-6-IPACCESSLOGP: SIP0: fman_fp_image:  list KNOCK_TCP_32022 permitted tcp *"
    !
     action 001.0 regexp "[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+" "$_syslog_msg" ADDR
     action 001.1 regexp "\([0-9]+\)," "$_syslog_msg" PORT
     action 001.2 regexp "[0-9]+" "$PORT" PORT
    !
     action 002.0 syslog msg "Received a knock from $ADDR on port $PORT..."
    !
     action 002.1 syslog msg "Adding $ADDR to the $KNOCK_ACL_SSH ACL"
    !
     action 003.0 cli command "enable"
     action 003.1 cli command "configure terminal"
     action 003.2 cli command "ip access-list extended $KNOCK_ACL_SSH"
     action 003.3 cli command "1 deny tcp host $ADDR any eq 22"
     action 003.4 cli command "end"
     action 003.5 cli command " "
    !
     action 004.0 syslog msg "Added  $ADDR to the $KNOCK_ACL_SSH ACL"
    !
     action 004.1 syslog msg "Adding $ADDR to the $KNOCK_ACL_TELNET ACL"
    !
     action 005.0 cli command "enable"
     action 005.1 cli command "configure terminal"
     action 005.4 cli command "ip access-list extended $KNOCK_ACL_TELNET"
     action 005.5 cli command "1 deny tcp host $ADDR any eq telnet"
     action 005.6 cli command "end"
     !
     action 006.0 syslog msg "Added  $ADDR to the $KNOCK_ACL_TELNET ACL"
     action 006.1 syslog msg "Waiting for 20 sec before deleting rules"
    !
     action 007.0 wait 20
    !
     action 008.0 syslog msg "Wait finished"
    !
     action 008.1 syslog msg "Removing $ADDR from the $KNOCK_ACL_SSH ACL"
    !
     action 009.0 cli command "enable"
     action 009.1 cli command "configure terminal"
     action 009.2 cli command "ip access-list extended $KNOCK_ACL_SSH"
     action 009.3 cli command "no deny tcp host $ADDR any eq 22"
     action 009.4 cli command "end"
    !
     action 010.0 syslog msg "Removed $ADDR to the $KNOCK_ACL_SSH ACL"
    !
     action 010.0 syslog msg "Removing $ADDR to the $KNOCK_ACL_TELNET ACL"
    !
     action 011.0 cli command "enable"
     action 011.1 cli command "configure terminal"
     action 011.2 cli command "ip access-list extended $KNOCK_ACL_TELNET"
     action 011.3 cli command "no deny tcp host $ADDR any eq telnet"
     action 011.4 cli command "end"
    !
     action 012.0 syslog msg "Removed $ADDR from the $KNOCK_ACL_TELNET ACL"
    exit
Источник — https://noname.com.ua/mediawiki/index.php?title=Cisco-COPP-ASR1001&oldid=13609