Wifi help: различия между версиями

Материал из noname.com.ua
Перейти к навигацииПерейти к поиску
 
(не показано 5 промежуточных версий этого же участника)
Строка 70: Строка 70:
 
==<code>iw</code>==
  
==<code>iw</code>==
 
<code>iw wlan1 info</code>
  
<code>iw wlan1 info</code>
−
</PRE>
 +
<PRE>
 
Interface wlan1
  
Interface wlan1
 
ifindex 4
  
ifindex 4
Строка 79: Строка 79:
 
channel 6 (2437 MHz), width: 20 MHz, center1: 2437 MHz
  
channel 6 (2437 MHz), width: 20 MHz, center1: 2437 MHz
 
txpower 31.00 dBm
  
txpower 31.00 dBm
−
<PRE>
 +
</PRE>
 
Тут важно <code>wiphy <B>1</B></code>
  
Тут важно <code>wiphy <B>1</B></code>
  +
<BR>
  +
<code> iw phy phy1 info</code>
  +
{{#spoiler:show=iw phy phy1 info|
  +
<PRE>
  +
Wiphy phy1
  +
wiphy index: 1
  +
max # scan SSIDs: 10
  +
max scan IEs length: 2048 bytes
  +
max # sched scan SSIDs: 16
  +
max # match sets: 16
  +
Retry short limit: 7
  +
Retry long limit: 4
  +
Coverage class: 0 (up to 0m)
  +
Device supports roaming.
  +
Device supports T-DLS.
  +
Supported Ciphers:
  +
* WEP40 (00-0f-ac:1)
  +
* WEP104 (00-0f-ac:5)
  +
* TKIP (00-0f-ac:2)
  +
* CCMP-128 (00-0f-ac:4)
  +
* CMAC (00-0f-ac:6)
  +
Available Antennas: TX 0 RX 0
  +
Supported interface modes:
  +
* IBSS
  +
* managed
  +
* AP
  +
* P2P-client
  +
* P2P-GO
  +
* P2P-device
  +
Band 1:
  +
Capabilities: 0x1022
  +
HT20/HT40
  +
Static SM Power Save
  +
RX HT20 SGI
  +
No RX STBC
  +
Max AMSDU length: 3839 bytes
  +
DSSS/CCK HT40
  +
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  +
Minimum RX AMPDU time spacing: 16 usec (0x07)
  +
HT TX/RX MCS rate indexes supported: 0-7
  +
Bitrates (non-HT):
  +
* 1.0 Mbps
  +
* 2.0 Mbps (short preamble supported)
  +
* 5.5 Mbps (short preamble supported)
  +
* 11.0 Mbps (short preamble supported)
  +
* 6.0 Mbps
  +
* 9.0 Mbps
  +
* 12.0 Mbps
  +
* 18.0 Mbps
  +
* 24.0 Mbps
  +
* 36.0 Mbps
  +
* 48.0 Mbps
  +
* 54.0 Mbps
  +
Frequencies:
  +
* 2412 MHz [1] (20.0 dBm)
  +
* 2417 MHz [2] (20.0 dBm)
  +
* 2422 MHz [3] (20.0 dBm)
  +
* 2427 MHz [4] (20.0 dBm)
  +
* 2432 MHz [5] (20.0 dBm)
  +
* 2437 MHz [6] (20.0 dBm)
  +
* 2442 MHz [7] (20.0 dBm)
  +
* 2447 MHz [8] (20.0 dBm)
  +
* 2452 MHz [9] (20.0 dBm)
  +
* 2457 MHz [10] (20.0 dBm)
  +
* 2462 MHz [11] (20.0 dBm)
  +
* 2467 MHz [12] (20.0 dBm)
  +
* 2472 MHz [13] (20.0 dBm)
  +
* 2484 MHz [14] (disabled)
  +
Band 2:
  +
Capabilities: 0x1062
  +
HT20/HT40
  +
Static SM Power Save
  +
RX HT20 SGI
  +
RX HT40 SGI
  +
No RX STBC
  +
Max AMSDU length: 3839 bytes
  +
DSSS/CCK HT40
  +
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  +
Minimum RX AMPDU time spacing: 16 usec (0x07)
  +
HT TX/RX MCS rate indexes supported: 0-7
  +
VHT Capabilities (0x00001020):
  +
Max MPDU length: 3895
  +
Supported Channel Width: neither 160 nor 80+80
  +
short GI (80 MHz)
  +
SU Beamformee
  +
VHT RX MCS set:
  +
1 streams: MCS 0-9
  +
2 streams: not supported
  +
3 streams: not supported
  +
4 streams: not supported
  +
5 streams: not supported
  +
6 streams: not supported
  +
7 streams: not supported
  +
8 streams: not supported
  +
VHT RX highest supported: 0 Mbps
  +
VHT TX MCS set:
  +
1 streams: MCS 0-9
  +
2 streams: not supported
  +
3 streams: not supported
  +
4 streams: not supported
  +
5 streams: not supported
  +
6 streams: not supported
  +
7 streams: not supported
  +
8 streams: not supported
  +
VHT TX highest supported: 0 Mbps
  +
VHT extended NSS: not supported
  +
Bitrates (non-HT):
  +
* 6.0 Mbps
  +
* 9.0 Mbps
  +
* 12.0 Mbps
  +
* 18.0 Mbps
  +
* 24.0 Mbps
  +
* 36.0 Mbps
  +
* 48.0 Mbps
  +
* 54.0 Mbps
  +
Frequencies:
  +
* 5170 MHz [34] (20.0 dBm)
  +
* 5180 MHz [36] (20.0 dBm)
  +
* 5190 MHz [38] (20.0 dBm)
  +
* 5200 MHz [40] (20.0 dBm)
  +
* 5210 MHz [42] (20.0 dBm)
  +
* 5220 MHz [44] (20.0 dBm)
  +
* 5230 MHz [46] (20.0 dBm)
  +
* 5240 MHz [48] (20.0 dBm)
  +
* 5260 MHz [52] (20.0 dBm) (radar detection)
  +
* 5280 MHz [56] (20.0 dBm) (radar detection)
  +
* 5300 MHz [60] (20.0 dBm) (radar detection)
  +
* 5320 MHz [64] (20.0 dBm) (radar detection)
  +
* 5500 MHz [100] (20.0 dBm) (radar detection)
  +
* 5520 MHz [104] (20.0 dBm) (radar detection)
  +
* 5540 MHz [108] (20.0 dBm) (radar detection)
  +
* 5560 MHz [112] (20.0 dBm) (radar detection)
  +
* 5580 MHz [116] (20.0 dBm) (radar detection)
  +
* 5600 MHz [120] (20.0 dBm) (radar detection)
  +
* 5620 MHz [124] (20.0 dBm) (radar detection)
  +
* 5640 MHz [128] (20.0 dBm) (radar detection)
  +
* 5660 MHz [132] (20.0 dBm) (radar detection)
  +
* 5680 MHz [136] (20.0 dBm) (radar detection)
  +
* 5700 MHz [140] (20.0 dBm) (radar detection)
  +
* 5720 MHz [144] (20.0 dBm) (radar detection)
  +
* 5745 MHz [149] (20.0 dBm)
  +
* 5765 MHz [153] (20.0 dBm)
  +
* 5785 MHz [157] (20.0 dBm)
  +
* 5805 MHz [161] (20.0 dBm)
  +
* 5825 MHz [165] (20.0 dBm)
  +
Supported commands:
  +
* new_interface
  +
* set_interface
  +
* new_key
  +
* start_ap
  +
* join_ibss
  +
* set_pmksa
  +
* del_pmksa
  +
* flush_pmksa
  +
* remain_on_channel
  +
* frame
  +
* set_wiphy_netns
  +
* set_channel
  +
* tdls_oper
  +
* start_sched_scan
  +
* start_p2p_device
  +
* connect
  +
* disconnect
  +
* crit_protocol_start
  +
* crit_protocol_stop
  +
* update_connect_params
  +
software interface modes (can always be added):
  +
valid interface combinations:
  +
* #{ managed } <= 2, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
  +
total <= 3, #channels <= 2
  +
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
  +
total <= 4, #channels <= 1
  +
Device supports scan flush.
  +
Device supports randomizing MAC-addr in sched scans.
  +
max # scan plans: 1
  +
max scan plan interval: 508
  +
max scan plan iterations: 0
  +
Supported TX frame types:
  +
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  +
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  +
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  +
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  +
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
  +
Supported RX frame types:
  +
* managed: 0x40 0xb0 0xd0
  +
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  +
* P2P-client: 0x40 0xd0
  +
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  +
* P2P-device: 0x40 0xd0
  +
Supported extended features:
  +
* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
  +
* [ 4WAY_HANDSHAKE_STA_PSK ]: 4-way handshake with PSK in station mode
  +
* [ 4WAY_HANDSHAKE_STA_1X ]: 4-way handshake with 802.1X in station mode
  +
* [ DFS_OFFLOAD ]: DFS offload
  +
* [ 4WAY_HANDSHAKE_AP_PSK ]: AP mode PSK offload support
  +
</PRE>
  +
}}
  +
  +
=<code>bettercap</code>=
  +
bettercap -iface wlan1

Текущая версия на 16:22, 11 мая 2024

Список каналов

iwlist

iwlist wlo1mon frequency



iw

iw wlan1 info 

Interface wlan1
	ifindex 4
	wdev 0x100000001
	addr fa:4d:23:da:9b:f6
	type managed
	wiphy 1
	channel 6 (2437 MHz), width: 20 MHz, center1: 2437 MHz
	txpower 31.00 dBm

Тут важно wiphy 1
iw phy phy1 info

bettercap

bettercap -iface wlan1

Источник — https://noname.com.ua/mediawiki/index.php?title=Wifi_help&oldid=13218