Vault PKI Kubernetes the hard way v2

Vault PKI for k8s

Эта статья основана на Vault_PKI и во многом дублирует ее, но тут я постарался подробно описать все применительно к "самодельному" домашнему кластеру

Задача:

• Собрать работающий кластер k8s из гавна и палок
• Сделать его полезным и использовать в домашней сети для каких-то задач

Шаги

• Купить железо
• Подготовить PKI (не является частью кластера но абсолютно необходимо!)
  • Подготовить консул (нужен как бекенд для Vault хотя это не единственный вариант) Consul_Basic_Setup
  • Подготовить Vault (базовые настройки: Vault_Basic_Setup
  • Настройить PKI Vault_PKI_Kubernetes_the_hard_way_v2
    • Создать корневой СА Vault_PKI_Kubernetes_the_hard_way_v2_Root_CA
    • Создать тестовые роли и проверить работу Vault_PKI_Intermediate_ca_etcd_Roles_and_permissions_Kubernetes_the_hard_way_v2

• Физическая коммутация
• Установка ОС на ноды
• Настройка сети (VLAN, VRF)
• Настройка ДНС
• Настройка etcd https://noname.com.ua/mediawiki/index.php/Kubernetes_the_hard_way_etcd_setup

Установка Vault

Предполагается что Vault уже установлен и настроен ( в моем случае по адресу http://vault.home:8200 )

Работа с Vault

Для создания endpoints потребуется токен с правами root и выставленная переменная VAULT_ADDR

export VAULT_ADDR=http://127.0.0.1:8200
export VAULT_TOKEN="s.Yb1J2VamFyYoav3VVE2YQQ88"

PKI

Логика работы (кратко)

• Создается несколько инстансов PKI внутри одного процесса Vault (для большей безопастности)
• Корневой сертефикат выписывается корневым PKI
  • Кроме прочего - он может быть удален из волта, закрыт в сейфе и т п для безопастности так как используется только для создания промежуточного СА
• этот сертификат (он НЕ является секретным) распространяется по всем нодам и используется для проверки
• этим сертификатом подписвается промежуточный CA
• промежуточный CA подписывает клиентские сертификаты

Кроме того можно удлинить эту цепочку используя уже готовый СА и промежуточный СА и импортировав их в Vault (но примера тут нет - я не делал)

• https://habr.com/ru/post/673730/

Создание корневого CA

Создание корневого СА: Vault_PKI_Kubernetes_the_hard_way_v2_Root_CA

Создание промежуточных СА

В целом можно использовать и корневой СА для создания конечных сертификатов но "лучшие собаководы" рекомендуют использовать промежуточный CA
ВАЖНО: В K8s используется множество разных CA, хотя большая часть документации об этом умалчивает - но каждый сервис может иметь свой собственный CA и подписанные им сертификаты, и именно так я и буду делать для лучшего понимания

CA для etcd

Пример настройки прав и ролей и создания сертефикатов для etcd Vault_PKI_Intermediate_ca_etcd_Kubernetes_the_hard_way_v2

Работа с PKI

Использование PKI для создания сертификатов

Создание пользователей и ролей не относится непосредсвенно к настройке PKI но добавлено для полноты так как все равно надо настроить =)

Работа с PKI

Посмотреть список сертификатов

vault list pki_intermediate_ca/certs
Keys
----
0e-be-9c-c3-80-0c-e2-51-e0-f8-e3-00-0d-5a-42-d3-cd-13-54-be
10-3c-b0-8c-50-8c-4f-21-14-a6-fd-32-36-87-ce-85-ef-e9-23-d2
29-02-a3-28-8e-fc-48-bd-1a-5b-f9-46-e1-bf-87-27-e0-80-79-c3
29-6a-69-20-c3-c2-a8-f3-ae-e7-13-0c-6b-52-c5-b6-49-c4-a3-77
38-b4-31-fc-82-6a-39-26-08-29-24-2d-da-ed-63-95-5c-7d-77-2b
3b-a5-4d-03-64-bf-91-b5-6a-6f-0a-c8-aa-05-11-68-29-a8-6d-dd
40-b2-aa-32-ee-ea-2f-84-75-bb-8f-ec-2e-98-56-70-1c-66-f6-0d

Прочитать сертификат

• 40-b2-aa-32-ee-ea-2f-84-75-bb-8f-ec-2e-98-56-70-1c-66-f6-0d это serial сертификата

vault read pki_intermediate_ca/cert/40-b2-aa-32-ee-ea-2f-84-75-bb-8f-ec-2e-98-56-70-1c-66-f6-0d --format=json

{
  "request_id": "a7af8390-c94b-6055-2148-283746cd64fa",
  "lease_id": "",
  "lease_duration": 0,
  "renewable": false,
  "data": {
    "certificate": "-----BEGIN CERTIFICATE-----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\n-----END CERTIFICATE-----",
    "revocation_time": 0
  },
  "warnings": null
}

Отозвать сертификат

vault write pki_intermediate_ca/revoke serial_number=
<serial number>

Очистить просроченные / отозванные сертификаты

vault write pki_intermediate_ca/tidy \
    safety_buffer=5s \
    tidy_cert_store=true \
    tidy_revocation_list=true

Проверка сертификатов с Nginx

Для проверки работы сертификатов настроим nginx как proxy. в качестве бекенда выступает сам Vault

Настройка Nginx

Предварительный конфиг виртуалхоста (пока не загружаю - так как ни ключа ни сертификата пока нет)

server {
    listen 8202 default_server ssl;
    root /var/www/html;
    server_name vault.home vault.local;
    access_log /var/log/nginx/vault-access.log postdata;
    error_log /var/log/nginx/vault-error.log;

    ssl_certificate     /etc/nginx/certs/vault.crt;
    ssl_certificate_key /etc/nginx/certs/vault.key;
    ssl_protocols       TLSv1 TLSv1.1 TLSv1.2;
    ssl_ciphers         HIGH:!aNULL:!MD5;

    location / {
        client_body_buffer_size      64k;
        client_body_in_single_buffer on;
        proxy_pass                   http://127.0.0.1:8200;
        proxy_set_header             Host $host:$server_port;
        proxy_set_header             X-Real-IP $remote_addr;
        proxy_set_header             X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header             X-Forwarded-Proto $scheme;
        proxy_http_version           1.1;
        proxy_request_buffering      off;
    }
}

Настройка Vault

Создание политик

• Файл vault-dot-home-server-crt-policy.hlc

path "pki_intermediate_ca/issue/vault-dot-home-server-crt"
{
  capabilities = ["read", "create", "list", "update"]
}

vault \
    policy \
        write \
            vault-dot-home-server-crt-policy \
            vault-dot-home-server-crt-policy.hlc

Создание пользователя для работы с сертефикатами

Еще раз подчеркну что пользователи используются тут ТОЛЬКО В ТЕСТОВЫХ ЦЕЛЯХ.

Существующие пользователи

vault list  auth/userpass/users
Keys
----
example-dot-home-any-crt-user
example-dot-home-client-crt-user
example-dot-home-server-crt-user

Новый пользователь с политикой для домена vault.home

• username: vault-dot-home-server-crt-user
• password: vault
• политики: vault-dot-home-server-crt-policy и default

vault \
  write auth/userpass/users/vault-dot-home-server-crt-user \
  password=vault \
  policies="vault-dot-home-server-crt-policy,default"

Проверка

export VAULT_ADDR="http://vault.home:8200"
unset VAULT_TOKEN


vault \
    login \
    -method=userpass \
    username=vault-dot-home-server-crt-user \
    password=vault


vault \
    write \
    -format=json pki_intermediate_ca/issue/vault-dot-home-server-crt \
    common_name="vault.home" \
    ttl="43800h" > vault.home.crt

Подготовка Consul Template

Установка

Так или иначе в зависимости от системы (это пример из интернета). Для arm версия другая.

$ wget https://releases.hashicorp.com/consul-template/0.19.5/consul-template_0.19.5_linux_amd64.zip
$ apt-get install unzip
$ unzip consul-template_0.19.5_linux_amd64.zip
$ mv consul-template /user/local/bin

Темплейты для сертефиката и ключа

• /etc/consul-template.d/templates/vault-cert.tpl

{{- /* vault-cert.tpl */ -}}
{{ with secret "pki_intermediate_ca/issue/vault-dot-home-server-crt" "common_name=vault.home" "ttl=2m" }}
{{ .Data.certificate }}
{{ .Data.issuing_ca }}{{ end }}

• /etc/consul-template.d/templates/vault-key.tpl

{{- /* vault-dot-home-key.tpl */ -}}
{{ with secret "pki_intermediate_ca/issue/vault-dot-home-server-crt" "common_name=vault.home" "ttl=2m"}}
{{ .Data.private_key }}{{ end }}

Конфигурация consul-template

• /etc/consul-template.d/configs/nginx-vault.hcl

token пропущен так как авторизация через логин/пароль и токен получается динамически

vault {
  address = "http://vault.home:8200"
#  token = "<TOKEN_HERE>"
  renew_token = true

  retry {
    enabled = true
    attempts = 5
    backoff = "250ms"
  }
}

template {
  source      = "/etc/consul-template.d/templates/vault-cert.tpl"
  destination = "/etc/nginx/certs/vault.crt"
  perms       = "0600"
  command     = "systemctl reload nginx"
}

template {
  source      = "/etc/consul-template.d/templates/vault-key.tpl"
  destination = "/etc/nginx/certs/vault.key"
  perms       = "0600"
  command     = "systemctl reload nginx"
}

Тестовый запуск

Скрипт

#!/bin/bash

VAULT_TOKEN=$(vault \
    login \
    -method=userpass \
    username=vault-dot-home-server-crt-user \
    password=vault \
    --format=json | jq -r .auth.client_token
)


#echo ${VAULT_TOKEN}

export VAULT_TOKEN=${VAULT_TOKEN}

/usr/local/consul/bin/consul-template \
    -config /etc/consul-template.d/configs/nginx-vault.hcl

systemd unit

Создаю Unit-file:

• имя файла /etc/systemd/system/consul-template-vault-nginx.service
• Юнит "с дебагом"
• Кроме всего прочего выводит переменные окружения (что бы убедиться что они нормально загружаются) и переменные systemd
• Токен сохраняется во временном файле и потом отттуда попадает в переменные окружения

[Unit]
Description=consul-template for Nginx/Vault
Requires=network-online.target
After=network-online.target

[Service]
EnvironmentFile=-/etc/default/consul-template
EnvironmentFile=-/etc/default/%N
EnvironmentFile=-/tmp/vault-token-%N

Restart=on-failure
ExecStartPre=/usr/bin/env
ExecStartPre=/bin/bash -c " echo b=%b"
ExecStartPre=/bin/bash -c " echo g=%g"
ExecStartPre=/bin/bash -c " echo G=%G"
ExecStartPre=/bin/bash -c " echo H=%H"
ExecStartPre=/bin/bash -c " echo i=%i"
ExecStartPre=/bin/bash -c " echo j=%j"
ExecStartPre=/bin/bash -c " echo m=%m"
ExecStartPre=/bin/bash -c " echo n=%n"
ExecStartPre=/bin/bash -c " echo N=%N"
ExecStartPre=/bin/bash -c " echo p=%p"
ExecStartPre=/bin/bash -c " echo u=%u"
ExecStartPre=/bin/bash -c " echo U=%U"
ExecStartPre=/bin/bash -c " echo v=%v"
ExecStartPre=/bin/bash -c " echo %%"

ExecStartPre=/bin/bash -c "printf 'VAULT_TOKEN=' > /tmp/vault-token-%N; \
    /usr/local/vault/bin/vault \
        login \
        -method=userpass \
        username=$VAULT_USERNAME \
        password=$VAULT_PASSWORD \
        --format=json | jq -r .auth.client_token >> /tmp/vault-token-%N"

ExecStartPre=/usr/bin/env
ExecStart=/usr/local/consul/bin/consul-template \
    $OPTIONS \
    -config='/etc/consul-template.d/configs/nginx-vault.hcl'

KillSignal=SIGINT

[Install]
WantedBy=multi-user.target

Проверка работы

Безопастность игнорируется в тестом окружении - в проде нужно спрятать токены

systemctl  status consul-template-vault-nginx.service
● consul-template-vault-nginx.service - consul-template for Nginx/Vault
   Loaded: loaded (/etc/systemd/system/consul-template-vault-nginx.service; disabled; vendor preset: enabled)
   Active: active (running) since Fri 2021-10-15 14:07:37 EEST; 21min ago
  Process: 19036 ExecStartPre=/usr/bin/env (code=exited, status=0/SUCCESS)
  Process: 19037 ExecStartPre=/bin/bash -c  echo b=7d0758bee53b4ddbba5674ef66a7c067 (code=exited, status=0/SUCCESS)
  Process: 19038 ExecStartPre=/bin/bash -c  echo g=root (code=exited, status=0/SUCCESS)
  Process: 19039 ExecStartPre=/bin/bash -c  echo G=0 (code=exited, status=0/SUCCESS)
  Process: 19040 ExecStartPre=/bin/bash -c  echo H=raspberrypi4 (code=exited, status=0/SUCCESS)
  Process: 19041 ExecStartPre=/bin/bash -c  echo i= (code=exited, status=0/SUCCESS)
  Process: 19042 ExecStartPre=/bin/bash -c  echo j=nginx (code=exited, status=0/SUCCESS)
  Process: 19043 ExecStartPre=/bin/bash -c  echo m=f7cb830984574abd90d3b1a9616450f3 (code=exited, status=0/SUCCESS)
  Process: 19044 ExecStartPre=/bin/bash -c  echo n=consul-template-vault-nginx.service (code=exited, status=0/SUCCESS)
  Process: 19045 ExecStartPre=/bin/bash -c  echo N=consul-template-vault-nginx (code=exited, status=0/SUCCESS)
  Process: 19046 ExecStartPre=/bin/bash -c  echo p=consul-template-vault-nginx (code=exited, status=0/SUCCESS)
  Process: 19047 ExecStartPre=/bin/bash -c  echo u=root (code=exited, status=0/SUCCESS)
  Process: 19048 ExecStartPre=/bin/bash -c  echo U=0 (code=exited, status=0/SUCCESS)
  Process: 19049 ExecStartPre=/bin/bash -c  echo v=5.4.51-v7l+ (code=exited, status=0/SUCCESS)
  Process: 19050 ExecStartPre=/bin/bash -c  echo % (code=exited, status=0/SUCCESS)
  Process: 19051 ExecStartPre=/bin/bash -c printf 'VAULT_TOKEN=' > /tmp/vault-token-consul-template-vault-nginx (code=exited, status=0/SUCCESS)
  Process: 19052 ExecStartPre=/bin/bash -c printf 'VAULT_TOKEN=' > /tmp/vault-token-consul-template-vault-nginx;      /usr/local/vault/bin/vault          login          -method=userpass          username=$VAULT_USERNAME          password=$VAULT_PASSWORD          --format=json | jq -r .auth.
  Process: 19064 ExecStartPre=/usr/bin/env (code=exited, status=0/SUCCESS)
 Main PID: 19065 (consul-template)
    Tasks: 13 (limit: 4915)
   CGroup: /system.slice/consul-template-vault-nginx.service
           └─19065 /usr/local/consul/bin/consul-template -config=/etc/consul-template.d/configs/nginx-vault.hcl

Oct 15 14:07:37 raspberrypi4 env[19064]: LANGUAGE=en_US.UTF-8
Oct 15 14:07:37 raspberrypi4 env[19064]: LC_TIME=C.UTF-8
Oct 15 14:07:37 raspberrypi4 env[19064]: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Oct 15 14:07:37 raspberrypi4 env[19064]: INVOCATION_ID=01f3f30994c34ca6888059f640df7bce
Oct 15 14:07:37 raspberrypi4 env[19064]: JOURNAL_STREAM=8:79140900
Oct 15 14:07:37 raspberrypi4 env[19064]: VAULT_ADDR=http://127.0.0.1:8200
Oct 15 14:07:37 raspberrypi4 env[19064]: VAULT_USERNAME=vault-dot-home-server-crt-user
Oct 15 14:07:37 raspberrypi4 env[19064]: VAULT_PASSWORD=vault
Oct 15 14:07:37 raspberrypi4 env[19064]: VAULT_TOKEN=s.tByQQL0DBdUjQH2lXAu2wuS8
Oct 15 14:07:37 raspberrypi4 systemd[1]: Started consul-template for Nginx/Vault.

Проверка работы Nginx

Без корневого сертификата

Ожидаемо - не работает

curl https://vault.home:8202 -v
* Expire in 5 ms for 1 (transfer 0x1682880)
*   Trying 192.168.1.223...
* TCP_NODELAY set
* Expire in 200 ms for 4 (transfer 0x1682880)
* Connected to vault.home (192.168.1.223) port 8202 (#0)
* ALPN, offering h2
* ALPN, offering http/1.1
* successfully set certificate verify locations:
*   CAfile: none
  CApath: /etc/ssl/certs
* TLSv1.3 (OUT), TLS handshake, Client hello (1):
* TLSv1.3 (IN), TLS handshake, Server hello (2):
* TLSv1.2 (IN), TLS handshake, Certificate (11):
* TLSv1.2 (OUT), TLS alert, unknown CA (560):
* SSL certificate problem: unable to get local issuer certificate
* Closing connection 0
curl: (60) SSL certificate problem: unable to get local issuer certificate
More details here: https://curl.haxx.se/docs/sslcerts.html

curl failed to verify the legitimacy of the server and therefore could not
establish a secure connection to it. To learn more about this situation and
how to fix it, please visit the web page mentioned above.

Добавление корневого сертификата

• Внимание - расширение файла ВАЖНО для утилиты update-ca-certificates. Если оставить PEM то сертификат не будет добавлен.
• rootCA.pem - файл корневого сертификата (см выше по тексту)
• Корневой сертификат (НО НЕ КЛЮЧ!) всегда можно получить curl http://vault.home:8200/v1/pki_root_ca/ca/pem

cp rootCA.pem /usr/local/share/ca-certificates/rootCA.crt

update-ca-certificates
Updating certificates in /etc/ssl/certs...
1 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...

Adding debian:rootCA.pem
done.
done.
root@raspberrypi4:/usr/local/share/ca-certificates/extra#

С добавленным корневым сертификатом

Ожидаемо работает: (404 это НЕ ошибка SSL)

curl https://vault.home:8202
404 page not found

Проверка обновления сертефикатов

while true;  do echo "" | openssl s_client -connect vault.home:8202  > 111 2>/dev/null ;  openssl x509 -in 111 -text -noout | grep -E 'Not [AB]'; sleep 30; done
            Not Before: Oct 15 11:55:07 2021 GMT
            Not After : Oct 15 11:57:35 2021 GMT
            Not Before: Oct 15 11:55:07 2021 GMT
            Not After : Oct 15 11:57:35 2021 GMT
            Not Before: Oct 15 11:55:07 2021 GMT
            Not After : Oct 15 11:57:35 2021 GMT
            Not Before: Oct 15 11:56:11 2021 GMT

Проверка отзыва сертификатов

TBD!

Дополнения

Параметры сертификатов

• name (string: <required>) – Specifies the name of the role to create. This is part of the request URL.

• ttl (string: "") – Specifies the Time To Live value provided as a string duration with time suffix. Hour is the largest suffix. If not set, uses the system default value or the value of max_ttl, whichever is shorter.

• max_ttl (string: "") – Specifies the maximum Time To Live provided as a string duration with time suffix. Hour is the largest suffix. If not set, defaults to the system maximum lease TTL.

• allow_localhost (bool: true) – Specifies if clients can request certificates for localhost as one of the requested common names. This is useful for testing and to allow clients on a single host to talk securely.

• allowed_domains (list: []) – Specifies the domains of the role. This is used with the allow_bare_domains and allow_subdomains options.

• allowed_domains_template ()bool: false) – When set, allowed_domains may contain templates, as with ACL Path Templating.

• allow_bare_domains (bool: false) – Specifies if clients can request certificates matching the value of the actual domains themselves; e.g. if a configured domain set with allowed_domains is example.com, this allows clients to actually request a certificate containing the name example.com as one of the DNS values on the final certificate. In some scenarios, this can be considered a security risk.

• allow_subdomains (bool: false) – Specifies if clients can request certificates with CNs that are subdomains of the CNs allowed by the other role options. This includes wildcard subdomains. For example, an allowed_domains value of example.com with this option set to true will allow foo.example.com and bar.example.com as well as *.example.com. This is redundant when using the allow_any_name option.

• allow_glob_domains (bool: false) - Allows names specified in allowed_domains to contain glob patterns (e.g. ftp*.example.com). Clients will be allowed to request certificates with names matching the glob patterns.

• allow_any_name (bool: false) – Specifies if clients can request any CN. Useful in some circumstances, but make sure you understand whether it is appropriate for your installation before enabling it.

• enforce_hostnames (bool: true) – Specifies if only valid host names are allowed for CNs, DNS SANs, and the host part of email addresses.

• allow_ip_sans (bool: true) – Specifies if clients can request IP Subject Alternative Names. No authorization checking is performed except to verify that the given values are valid IP addresses.

• allowed_uri_sans (string: "") - Defines allowed URI Subject Alternative Names. No authorization checking is performed except to verify that the given values are valid URIs. This can be a comma-delimited list or a JSON string slice. Values can contain glob patterns (e.g. spiffe://hostname/*).

• allowed_other_sans (string: "") – Defines allowed custom OID/UTF8-string SANs. This can be a comma-delimited list or a JSON string slice, where each element has the same format as OpenSSL: <oid>;<type>:<value>, but the only valid type is UTF8 or UTF-8. The value part of an element may be a * to allow any value with that OID. Alternatively, specifying a single * will allow any other_sans input.

• server_flag (bool: true) – Specifies if certificates are flagged for server use.

• client_flag (bool: true) – Specifies if certificates are flagged for client use.

• code_signing_flag (bool: false) – Specifies if certificates are flagged for code signing use.

• email_protection_flag (bool: false) – Specifies if certificates are flagged for email protection use.

• key_type (string: "rsa") – Specifies the type of key to generate for generated private keys and the type of key expected for submitted CSRs. Currently, rsa and ec are supported, or when signing CSRs any can be specified to allow keys of either type and with any bit size (subject to > 1024 bits for RSA keys).

• key_bits (int: 2048) – Specifies the number of bits to use for the generated keys. This will need to be changed for ec keys, e.g., 224, 256, 384 or 521.

• key_usage (list: ["DigitalSignature", "KeyAgreement", "KeyEncipherment"]) – Specifies the allowed key usage constraint on issued certificates. Valid values can be found at https://golang.org/pkg/crypto/x509/#KeyUsage - simply drop the KeyUsage part of the value. Values are not case-sensitive. To specify no key usage constraints, set this to an empty list.

• ext_key_usage (list: []) – Specifies the allowed extended key usage constraint on issued certificates. Valid values can be found at https://golang.org/pkg/crypto/x509/#ExtKeyUsage - simply drop the ExtKeyUsage part of the value. Values are not case-sensitive. To specify no key usage constraints, set this to an empty list.

• ext_key_usage_oids (string: "") - A comma-separated string or list of extended key usage oids.

• use_csr_common_name (bool: true) – When used with the CSR signing endpoint, the common name in the CSR will be used instead of taken from the JSON data. This does not include any requested SANs in the CSR; use use_csr_sans for that.

• use_csr_sans (bool: true) – When used with the CSR signing endpoint, the subject alternate names in the CSR will be used instead of taken from the JSON data. This does not include the common name in the CSR; use use_csr_common_name for that.

• ou (string: "") – Specifies the OU (OrganizationalUnit) values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• organization (string: "") – Specifies the O (Organization) values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• country (string: "") – Specifies the C (Country) values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• locality (string: "") – Specifies the L (Locality) values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• province (string: "") – Specifies the ST (Province) values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• street_address (string: "") – Specifies the Street Address values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• postal_code (string: "") – Specifies the Postal Code values in the subject field of issued certificates. This is a comma-separated string or JSON array.

• serial_number (string: "") – Specifies the Serial Number, if any. Otherwise Vault will generate a random serial for you. If you want more than one, specify alternative names in the alt_names map using OID 2.5.4.5.

• generate_lease (bool: false) – Specifies if certificates issued/signed against this role will have Vault leases attached to them. Certificates can be added to the CRL by vault revoke <lease_id> when certificates are associated with leases. It can also be done using the pki/revoke endpoint. However, when lease generation is disabled, invoking pki/revoke would be the only way to add the certificates to the CRL.

• no_store (bool: false) – If set, certificates issued/signed against this role will not be stored in the storage backend. This can improve performance when issuing large numbers of certificates. However, certificates issued in this way cannot be enumerated or revoked, so this option is recommended only for certificates that are non-sensitive, or extremely short-lived. This option implies a value of false for generate_lease.

• require_cn (bool: true) - If set to false, makes the common_name field optional while generating a certificate.

• policy_identifiers (list: []) – A comma-separated string or list of policy OIDs.

• basic_constraints_valid_for_non_ca (bool: false) - Mark Basic Constraints valid when issuing non-CA certificates.

• not_before_duration (duration: "30s") – Specifies the duration by which to backdate the NotBefore property.

Ссылки

Русскоязычные

• О ограничениях накладывемых на сертефикаты https://www.sysadmins.lv/blog-ru/znakomtes-basic-constraints.aspx
• https://pro-ldap.ru/tr/zytrax/tech/ssl.html
• https://sgolubev.ru/openssl-ca/
• На русском с минимальными пояснениями: https://itdraft.ru/2020/12/02/hashicorp-vault-kak-czentr-sertifikaczii-ca-vault-pki/

Vault

• https://russianblogs.com/article/8543260210/
• https://itdraft.ru/2020/12/02/hashicorp-vault-kak-czentr-sertifikaczii-ca-vault-pki/

Прочие

• https://www.vaultproject.io/docs/secrets/pki
• https://learn.hashicorp.com/tutorials/vault/pki-engine
• https://stackoverflow.com/questions/10175812/how-to-generate-a-self-signed-ssl-certificate-using-openssl
• https://medium.com/hashicorp-engineering/pki-as-a-service-with-hashicorp-vault-a8d075ece9a