Aacraid monitoring

Материал из noname.com.ua
Перейти к навигацииПерейти к поиску

Adaptec Raid Monitoring

После года эксплуотации мне пришла в голову мысль, что никак кроме как по состоянию "лампочек" я не узнаю, живые ли винты в рейде. А их у меня аж 2, в шасси от SuperMicro

04:01.0 RAID bus controller: Adaptec AAC-RAID (rev 02)
        Subsystem: Adaptec ASR-4000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping+ SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (250ns min, 250ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d8200000 (64-bit, non-prefetchable) [size=2M]
        Region 2: Memory at d8000000 (32-bit, non-prefetchable) [size=2M]
        Region 4: Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] PCI-X non-bridge device
                Command: DPERE- ERO- RBC=512 OST=4
                Status: Dev=04:01.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz-
        Kernel driver in use: aacraid


# Copyright 1999-2009 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: $

EAPI=2

inherit multilib rpm versionator


DESCRIPTION="Storage manager for Adaptec RAID controller"
HOMEPAGE="http://www.adaptec.com/en-US/downloads/"

LICENSE="Adaptec"
SLOT="0"
KEYWORDS="~amd64"
IUSE="X"
RESTRICT="mirror"

SRC_URI_BASE="http://download.adaptec.com/raid/storage_manager"
SRC_URI_amd64="${SRC_URI_BASE}/${PN}_linux_x64_v${PV}.rpm"

SRC_URI="amd64? ( ${SRC_URI_amd64} )"


RDEPEND="sys-libs/libstdc++-v3
                 !=sys-devel/gcc-3*
                 X? ( dev-java/sun-jdk:1.5[X] )
                 !X? ( dev-java/sun-jdk:1.5 )"

S="${WORKDIR}/usr/StorMan"

src_unpack() {
          rpm_src_unpack
}

src_configure() {
          # binpkg - nothing to do here
                 :;
}

src_compile() {
          # binpkg - nothing to do here
                 :;
}

src_install() {
        if use X ; then
                cd "${S}" || die
                insinto /opt/StorMan
                doins index.html *.jar *.pps *.so
                # StorMan needs the help inside of /opt/StorMan
                doins -r help

                into /opt
                dobin "${FILESDIR}"/StorMan.sh
                dosed "s:%LIBDIR%:/usr/$(get_libdir):" /opt/bin/StorMan.sh
                dobin "${FILESDIR}"/StorAgnt.sh
                dosed "s:%LIBDIR%:/usr/$(get_libdir):" /opt/bin/StorAgnt.sh

                dosed 's:\(\.log=\):\1/var/log:g' /opt/StorMan/RaidLog.pps
        fi

        into /opt/StorMan
        dobin {arc,hr}conf
        dosym ../StorMan/bin/arcconf /opt/bin/arcconf
        dosym ../StorMan/bin/hrconf /opt/bin/hrconf

        dodoc README.TXT

}