ELK

Материал из noname.com.ua
Перейти к навигацииПерейти к поиску

ELK на минималках

Эта заметка описывает минимальную конфигурацию для частного случая - получения в syslog сообщений от свитчей.
Тут нет никакой отказоустойчивости - и это осознанное решение

Логика работы

  • свитч отправляет сообщение по UDP
  • syslog-ng ловит сообщение и пишет его в файл
  • файл разбирает и logstash пишет в elasticserach
  • логи в elasticsearch смотреть через kibana
  • Кроме этого syslog-ng пишет все логи в Elasticsearch напрямую но в другой индекс (который хранится меньше времени)
  • старые файлы удаляет logrotate
  • старые индексы удаляет Elasticsearch-Curator



Очередность повествования тут несколько нарушена - конечно сначала нужно поставить все перечисленное и только потом приступать к настройке и запуску

Syslog-Ng

Starting with syslog-ng version 3.6.1 the default system() source on Linux systems using systemd uses journald as its standard system() source.

Общая настройка syslog-ng

Базовый конфигурационный файл

@version: 3.25
@include "scl.conf"

options {
    chain_hostnames(off);
    flush_lines(0);
    use_dns(no);
    use_fqdn(no);
    dns-cache(no);
    owner("root");
    group("adm");
    perm(0640);
    stats_freq(0);
    bad_hostname("^gconfd$");
};

source s_src {
       system();
       internal();
};

source s_net_udp_port_514 {
    udp(ip(10.255.255.16) port(514));
};


destination d_auth        { file("/var/log/auth.log"); };
destination d_cron        { file("/var/log/cron.log"); };
destination d_daemon      { file("/var/log/daemon.log"); };
destination d_kern        { file("/var/log/kern.log"); };
destination d_lpr         { file("/var/log/lpr.log"); };
destination d_mail        { file("/var/log/mail.log"); };
destination d_syslog      { file("/var/log/syslog"); };
destination d_user        { file("/var/log/user.log"); };
destination d_uucp        { file("/var/log/uucp.log"); };
destination d_mailinfo    { file("/var/log/mail.info"); };
destination d_mailwarn    { file("/var/log/mail.warn"); };
destination d_mailerr     { file("/var/log/mail.err"); };
destination d_newscrit    { file("/var/log/news/news.crit"); };
destination d_newserr     { file("/var/log/news/news.err"); };
destination d_newsnotice  { file("/var/log/news/news.notice"); };
destination d_debug       { file("/var/log/debug"); };
destination d_error       { file("/var/log/error"); };
destination d_messages    { file("/var/log/messages"); };
destination d_console     { usertty("root"); };
destination d_console_all { file(`tty10`); };
destination d_xconsole    { pipe("/dev/xconsole"); };
#destination d_net        { tcp("127.0.0.1" port(1000) log_fifo_size(1000)); };
destination d_ppp         { file("/var/log/ppp.log"); };

filter f_dbg    { level(debug); };
filter f_info   { level(info); };
filter f_notice { level(notice); };
filter f_warn   { level(warn); };
filter f_err    { level(err); };
filter f_crit   { level(crit .. emerg); };

filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
filter f_error { level(err .. emerg) ; };
filter f_messages { level(info,notice,warn) and
                    not facility(auth,authpriv,cron,daemon,mail,news); };

filter f_auth   { facility(auth, authpriv) and not filter(f_debug); };
filter f_cron   { facility(cron) and not filter(f_debug); };
filter f_daemon { facility(daemon) and not filter(f_debug); };
filter f_kern   { facility(kern) and not filter(f_debug); };
filter f_lpr    { facility(lpr) and not filter(f_debug); };
filter f_local  { facility(local0, local1, local3, local4, local5,
                        local6, local7) and not filter(f_debug); };
filter f_mail    { facility(mail) and not filter(f_debug); };
filter f_news    { facility(news) and not filter(f_debug); };
filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_debug); };
filter f_user    { facility(user) and not filter(f_debug); };
filter f_uucp    { facility(uucp) and not filter(f_debug); };

filter f_cnews  { level(notice, err, crit) and facility(news); };
filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };

filter f_ppp     { facility(local2) and not filter(f_debug); };
filter f_console { level(warn .. emerg); };


@include "/etc/syslog-ng/conf.d/*.conf"
########################
# Log paths
########################
log { source(s_src); filter(f_auth);    destination(d_auth); };
log { source(s_src); filter(f_cron);    destination(d_cron); };
log { source(s_src); filter(f_daemon);  destination(d_daemon); };
log { source(s_src); filter(f_kern);    destination(d_kern); };
log { source(s_src); filter(f_lpr);     destination(d_lpr); };
log { source(s_src); filter(f_syslog3); destination(d_syslog); };
log { source(s_src); filter(f_user);    destination(d_user); };
log { source(s_src); filter(f_uucp);    destination(d_uucp); };
log { source(s_src); filter(f_mail);    destination(d_mail); };
log { source(s_src); filter(f_news); filter(f_crit);   destination(d_newscrit); };
log { source(s_src); filter(f_news); filter(f_err);    destination(d_newserr); };
log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
log { source(s_src); filter(f_debug);    destination(d_debug); };
log { source(s_src); filter(f_error);    destination(d_error); };
log { source(s_src); filter(f_messages); destination(d_messages); };
log { source(s_src); filter(f_console);
    destination(d_console_all); destination(d_xconsole); };
log { source(s_src); filter(f_crit); destination(d_console); };

Модуль elasticsearch-http

  • Важно: elasticsearch/elasticsearch2 примеры настройки которых встречаются в интернете уже не поддерживаются и в моем дистрибутиве отсутвуют.


Пример конфигурационного файла

destination d_elasticsearch_http {
    elasticsearch-http(
        index("syslog-ng-${YEAR}${MONTH}${DAY}")
        type("syslog-ng")
        url("127.0.0.1:9200/_bulk")
#        workers(4)
        batch_lines(128)
#        batch_timeout(10000)
        timeout(100)
        template("$(format-json --scope rfc5424 --scope dot-nv-pairs --rekey .* --shift 1 --scope nv-pairs  --key ISODATE @timestamp=${ISODATE})")
    );

};

destination d_elastic_debug {
    file("/var/log/elasticsearch_debug.log");.
};

log {
    source(s_src);
    destination(d_elasticsearch_http);
    flags(flow-control);
};


  • elasticsearch-http - имя модуля
  • index("syslog-ng-${YEAR}${MONTH}${DAY}") - Такая запись позволяет просто ротировать индексы, естественно можно делать часовые или по имени источника
  • type("syslog-ng") - ВАЖНО это поле нельзя оставлять пустым! Иначе с Elasticsearch 6 не работает, пояснение ниже
  • url("127.0.0.1:9200/_bulk") - HTTP endpoint
  • workers(4)
  • batch_lines(128) -
  • batch_timeout(10000) - при большом значении syslog-ng держит в себе, в результате возникает отставание и логи видны не сразу (хотя если верить описанию то должен срабатывать когда ИЛИ прошло время ИЛИ когда скопилось достаточно сообщений)
  • timeout(100) - HTTP timeout
  • template("$(format-json --scope rfc5424 --scope dot-nv-pairs --rekey .* --shift 1 --scope nv-pairs --key ISODATE @timestamp=${ISODATE})")

У меня была проблема с тем что логи писались по UTC т е отставали на три часа - эту проблему решило удаление --exclude DATE из темплейта


Допущенные неочевидные ошибки

  • ВАЖНО не забыть разрешить автосоздание индекса в настройках Elasticsearch
  • ВАЖНО Если не указать type("какая-то-строка") то запрос в Elastic выглядит так (отформатировано для чтения!!!! на самом деле требуется в одну строку!):
{
    "index":
        {"_index":"syslog-ng-20210805"}
}
{
    "PROGRAM":"syslog-ng",
    "PRIORITY":"notice",
    "PID":"1655224",
    "MESSAGE":"Server returned with a 5XX (server errors) status code, which indicates server failure.; url='127.0.0.1:9200/_bulk', status_code='504', driver='d_elasticsearch_http#0', location='#buffer:4:3'",
    "ISODATE":"2021-08-05T11:29:38+03:00",
    "HOST":"donec2",
    "FACILITY":"syslog",
    "@timestamp":"2021-08-05T11:29:38+03:00"
}

и в результате возникает Validation Error. При этом сам syslog-ng говорит что получен код 4XX без всяких подробностей.

Неправильно (индекс - тестовый)

curl \
    -H "Content-Type: application/x-ndjson" \
    -XPOST "http://172.31.100.33:9200/_bulk" \
 --data-binary \
'
{ "index" : { "_index" : "test-3" }
{ "PROGRAM":"syslog-ng","PRIORITY":"notice","PID":"11655224", "MESSAGE":"Server returned ...", "ISODATE":"2021-08-05T11:29:38+03:00", "HOST":"donec2", "FACILITY":"syslog", "@timestamp":"2021-08-05T11:29:38+03:00"}
'


Ответ:

{
  "error": {
    "root_cause": [
      {
        "type": "action_request_validation_exception",
        "reason": "Validation Failed: 1: type is missing;"
      }
    ],
    "type": "action_request_validation_exception",
    "reason": "Validation Failed: 1: type is missing;"
  },
  "status": 400
}

Правильно

curl \
    -H "Content-Type: application/x-ndjson" \
    -XPOST "http://172.31.100.33:9200/_bulk" \
 --data-binary \
'
{ "index" : { "_index" : "test-3", "_type": "some-index-type" } }
{ "PROGRAM":"syslog-ng","PRIORITY":"notice","PID":"11655224", "MESSAGE":"Server returned ...", "ISODATE":"2021-08-05T11:29:38+03:00", "HOST":"donec2", "FACILITY":"syslog", "@timestamp":"2021-08-05T11:29:38+03:00"}
'
{
  "took": 99,
  "errors": false,
  "items": [
    {
      "index": {
        "_index": "test-3",
        "_type": "some-index-type",
        "_id": "C27eFnsBD0LCsZOJt_Ez",
        "_version": 1,
        "result": "created",
        "_shards": {
          "total": 2,
          "successful": 1,
          "failed": 0
        },
        "_seq_no": 0,
        "_primary_term": 1,
        "status": 201
      }
    }
  ]
}

Как дебагать траффик

Что бы исследовать траффик между syslog-ng и elasticsearch можно воспользоваться трюком с промежуточным прокси который будет логгировать запросы
Для nginx - https://noname.com.ua/mediawiki/index.php/Nginx_Log_Post

server {
    listen              127.0.0.1:9200;
    server_name         elasticsearch;
    log_not_found       on;
    error_log           /var/log/nginx/elasticsearch_error_log;
    set $resp_body "";
    lua_need_request_body on;
    set $resp_body "";
    body_filter_by_lua '
      local resp_body = string.sub(ngx.arg[1], 1, 1000)
      ngx.ctx.buffered = (ngx.ctx.buffered or "") .. resp_body
      if ngx.arg[2] then
        ngx.var.resp_body = ngx.ctx.buffered
      end
    ';

    location / {
        proxy_pass                  http://172.31.100.33:9200;
        proxy_set_header            Host $http_host;
        proxy_read_timeout          3600s;
        proxy_http_version 1.1;
        client_max_body_size        10m;
        client_body_buffer_size     256k;
        client_body_temp_path       /var/nginx/client_body_temp;
        access_log          /var/log/nginx/elasticsearch_access_log  bodylog;
    }
}

ВАЖНОЖ nginx в убунте 20.04 имеет баг в модуле перла - его нужно отключить. Это касается только пакета nginx-extras где есть поддержка lua

Elasticsearch

В моем случае я ограничен версией 6.X так как есть софт который не поддерживает более новые версии.

пример Для 7-й версии (для 6 помеянть 7-->6)

wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | sudo apt-key add -
sudo apt-get install apt-transport-https
echo "deb https://artifacts.elastic.co/packages/7.x/apt stable main" | sudo tee -a /etc/apt/sources.list.d/elastic-7.x.list
sudo apt-get update
sudo apt-get install elasticsearch


Отличия от "умолчального" конфига минимальны

cat /etc/elasticsearch/elasticsearch.yml | grep -v '^#'
cluster.name: elastic-cluster-1
node.name: node-1
path.data: /var/lib/elasticsearch
path.logs: /var/log/elasticsearch
network.host: 172.31.100.33
http.port: 9200
http.cors.enabled: true
http.cors.allow-origin: "http://172.31.100.33:8080"

action.auto_create_index: "network*,*kibana*,*logs*,.watches,.triggered_watches,.watcher-history-*,*syslog-ng*,test-*"
xpack.security.enabled: false

Обратить внимание - разрешено создание индексов "network*" и syslog-ng*

Elasticsearch-Curator

Куратор предназначен для удаления старых индексов (точнее он хорошо это делает в числе прочих задач). Установка:

Запускать по крону раз в сутки (чаще только если нужно - в моем случае смысла нет)

#!/bin/bash



/usr/bin/curator \
    --config /usr/local/elasticsearch_curator/curator.yml \
    /usr/local/elasticsearch_curator/delete.yaml 2>&1 \
    | logger \
        -t "elasticsearch_curator" \
        -n 10.255.255.16

Конфигурационные файлы:

  • /usr/local/elasticsearch_curator/curator.yml - подключение к базе
---
client:
  hosts:
    - 127.0.0.1
  port: 9200
  url_prefix:
  use_ssl: False
  certificate:
  client_cert:
  client_key:
  ssl_no_validate: False
  username:
  password:
  timeout: 30
  master_only: False

logging:
  loglevel: INFO
  logfile:
  logformat: default
  blacklist: ['elasticsearch', 'urllib3']

  • usr/local/elasticsearch_curator/delete.yaml - список действий, в примере удаляется 3 группы индексов
actions:
  1:
    action: delete_indices
    description: >-
      Delete indices older than 30 days (based on index name), for network-
      prefixed indices. Ignore the error if the filter does not result in an
      actionable list of indices (ignore_empty_list) and exit cleanly.
    options:
      ignore_empty_list: True
      disable_action: False
    filters:
    - filtertype: pattern
      kind: prefix
      value: network-
    - filtertype: age
      source: name
      direction: older
      timestring: '%Y.%m.%d'
      unit: days
      unit_count: 30
  2:
    action: delete_indices
    description: >-
      Delete indices older than 30 days (based on index name), for syslog-ng-
      prefixed indices. Ignore the error if the filter does not result in an
      actionable list of indices (ignore_empty_list) and exit cleanly.
    options:
      ignore_empty_list: True
      disable_action: False
    filters:
    - filtertype: pattern
      kind: prefix
      value: syslog-ng-
    - filtertype: age
      source: name
      direction: older
      timestring: '%Y.%m.%d'
      unit: days
      unit_count: 30
  3:
    action: delete_indices
    description: networkdevices
    options:
      ignore_empty_list: True
      disable_action: False
    filters:
    - filtertype: pattern
      kind: prefix
      value: networkdevice-
    - filtertype: age
      source: name
      direction: older
      timestring: '%Y.%m.%d'
      unit: days
      unit_count: 365

Filebeat

В этой инсталляции не используется

Logstash

Подробно читать - https://www.elastic.co/guide/en/logstash/current/index.html

Input

input {
...
    file {
        type => "network_device_log"
        path => [
            "/var/log/network*.log"
        ]
        exclude => ["*.gz","*.zip","*.rar", "*.1" ]
        start_position => beginning
        stat_interval => 1
        discover_interval => 30
    }
...
}

Filter

Syslog-Ng пишет в файл, а Logstash его читает.
В общем случае можно обойтись без сохранения на диск, но мне часто удобнее искать в файле, в то же время кому-то удобнее искать в Kibana
Конечно можно заставить логстеш слушать на сислог-порту и обойтись без syslog-ng или наоборот обойтись без logstash - это просто одна из возможных конфигураций.
Формат записи подобран так что бы его было легко читать глазом и так же легко разбирать программно.

template t_debug_switches {
    template("$ISODATE | ${SOURCEIP} | $PRIORITY | $FACILITY | $PROGRAM | $MESSAGE\n");
    template_escape(no);
};

destination d_switches {
    file("/var/log/network-${SOURCEIP}.log"
        template(t_debug_switches)
        template_escape(no)
    );
};


log {
    source(s_net_udp_port_514);
    destination(d_switches);
#    flags(final);
};
filter {
    if ([type] == "network_device_log") {
        grok {
            break_on_match => true
            add_tag => ["network_device_log"]
            tag_on_failure => ["failure_on_network_device_log_grok"]
            match => { "message" => "%{TIMESTAMP_ISO8601} \| %{IPORHOST:log_source} \| %{WORD:log_level} \| %{WORD:log_facility} \| %{PROG:prog} \| %{GREEDYDATA:network_device_message}" }
            add_field => [ "received_at", "%{@timestamp}" ]
            add_field => [ "received_from", "%{host}" ]
        }
    }
}

Output

Запись в elasticsearch с разбивкой индекса по дням

output {
    if [type] == 'network_device_log' {
        elasticsearch {
            hosts  => "172.31.100.33:9200"
            index  => "network-%{+YYYY.MM.dd}"
            action => "index"
        }
    }
}

Kibana

Cсылки