HP Proliant Raid

DL180 G6

lspci | grep -i raid
09:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)

lspci -vv  -s 09:00.0
09:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)
	Subsystem: Hewlett-Packard Company Smart Array P410
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 37
	Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=2M]
	Region 2: Memory at fbbff000 (64-bit, non-prefetchable) [size=4K]
	Region 4: I/O ports at d800 [size=256]
	Expansion ROM at fbb00000 [disabled] [size=512K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
		DevCtl:	CorrErr- NonFatalErr+ FatalErr+ UnsupReq-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 256 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x8, ASPM not supported
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s (downgraded), Width x8 (ok)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS- TPHComp- ExtTPHComp-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [ac] MSI-X: Enable+ Count=16 Masked-
		Vector table: BAR=0 offset=001c2000
		PBA: BAR=0 offset=001c4000
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		AERCap:	First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 00000000 00000000 00000000
	Kernel driver in use: hpsa
	Kernel modules: hpsa

Утилиты

• https://downloads.linux.hpe.com/SDR/repo/mcp/ubuntu/pool/non-free/

(я доставал файлы так как в пакете сломаны зависимости)

Сокращения, которые можно использовать в командах

• chassisname = ch
• controller = ctrl
• logicaldrive = ld
• physicaldrive = pd
• drivewritecache = dwc

Просмотр конфигурации

hpacucli ctrl all show config

Smart Array P410 in Slot 1                (sn: PACCR9SYRIHU  )
   unassigned
      physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK)
   SEP (Vendor ID PMCSIERA, Model  SRC 8x6G) 250 (WWID: 5001438006116C2F)

Тут в примере - один диск который включен но никак не настроен

Более детально:

hpacucli ctrl all show config detail

Smart Array P410 in Slot 1
   Bus Interface: PCI
   Slot: 1
   Serial Number: PACCR9SYRIHU
   Cache Serial Number: PAAVP9SYYM4C
   RAID 6 (ADG) Status: Disabled
   Controller Status: OK
   Hardware Revision: C
   Firmware Version: 6.64
   Wait for Cache Room: Disabled
   Surface Analysis Inconsistency Notification: Disabled
   Post Prompt Timeout: 0 secs
   Cache Board Present: True
   Cache Status: Not Configured
   Drive Write Cache: Disabled
   Total Cache Size: 512 MB
   Total Cache Memory Available: 400 MB
   No-Battery Write Cache: Disabled
   Battery/Capacitor Count: 0
   SATA NCQ Supported: True



   unassigned

      physicaldrive 2I:1:3
         Port: 2I
         Box: 1
         Bay: 3
         Status: OK
         Drive Type: Unassigned Drive
         Interface Type: SAS
         Size: 300 GB
         Rotational Speed: 10000
         Firmware Revision: HPD7
         Serial Number: 6XP5CLK80000B335CPL7
         Model: HP      EG0300FBLSE
         PHY Count: 2
         PHY Transfer Rate: 6.0Gbps, Unknown


   SEP (Vendor ID PMCSIERA, Model  SRC 8x6G) 250
      Device Number: 250
      Firmware Version: RevC
      WWID: 5001438006116C2F
      Vendor ID: PMCSIERA
      Model:  SRC 8x6G

Статус контроллера

hpacucli ctrl all show status

Smart Array P410 in Slot 1
   Controller Status: OK
   Cache Status: Not Configured